Mother's Day Shaker card

This mason jar shaker card was inspired by this one from Chari Moss. I had a lot of technique troubles with this card but I got it done in the end.

It was my first attempt at a shaker card and I learnt a lot! If you wanted to try to make a card like this, I recommend that you check out Lawn Fawn's youtube video channel and find the video of Chari's shaker card.

It really is easy to make if you have the right equipment. I just couldn't find my Stazon black ink or clear acetate sheets. I tried to buy them from my local scrapbooking store and they didn't have any in stock. I also went to Spotlight but they were sold out. I ended up buying a Versamark brilliance but, although it dried on the plastic, it easily scratched off when I was attaching the top layer to the card.

Materials:

Card: Concord Crush, Rich Razzleberry, Whisper White, In Colour patterned paper
Ink: Concord Crush, Rich Razzleberry, Melon Mambo, Versamark Brilliance in Black, Copic Sketch N1 marker.
Stamps: Summertime Charm by Lawn Fawn, Teeny Tiny Sentiments by Stampin' Up
Accessories: Striped organza ribbon, sequins, clear plastic treat bag, purple rhinestones, iridescent clear beads, all from discount stores
Tools: Big shot machine, Summertime Charm Lawn Cuts dies by Lawn Fawn, corner rounder punch by Fiskars, white foam from Spotlight, craft glue, dimensionals

Valentine's Day

I made this card for my husband for Valentine's Day last year. I just love how cute Lawn Fawn's stamps are!

Materials:
Cardstock: Cherry Cobbler, Brushed Gold, Whisper White
Ink: Tuxedo Black, Versamark, markers - Crumb Cake, Soft Suede, Chocolate Chip, Pink Pirouette, Basic Grey, Daffodil Delight, Rose Red, Bashful Blue, Real Red
Stamps: Teeny Tiny Backdrops, Love'n Breakfas
Accessories: Raspberry Ripple stitched satin ribbon
Tools: Glossy Accents

Personalised Wedding Card

The trickiest thing about this card was doing the alphabet stamping. It's a simple card and I'm happy with the result. Except for the bow. I have to get a bow tying device.

The cardstock was a shimmery white in real life which isn't caught by the camera here.

Materials:
Cardstock: Shimmery White, Blushing Bride
Ink: Tuxedo Black, Blushing Bride
Stamps: Happily Ever After, Sally's abc's, both by Lawn Fawn
Accessories: Striped organza ribbon, Basic rhinestones
Tools: Nestable square dies, dimensionals

3rd Anniversary

Happy 3rd anniversary to my gorgeous hubby! This is the card I made for him. It's very cutesy but he likes it anyway. The muffins were inspired by this card by Chari Moss.

Here's how I made it:

Materials:
Cardstock: Confetti White, Crumb Cake, old blue that was lying around.
Ink: Tuxedo Black (Memento), Crumb Cake, markers - Crumb Cake, Bashful Blue, Pink Pirouette, Pretty in Pink, Real Red, Basic Black.
Stamps: Love n Breakfast, Sopie's Sentiments (both Lawn Fawn).
Accessories: Hemp twine, Bevelled Window Panes, blue organza ribbon (Kaiser Craft), Basic Rhinestones.
Tools: Big Shot machine, polka dot embossing folder, sponge, mini glue dots, dimensionsals.

Tips and Tricks:
1. It's pretty straight forward - the embossed white layer was sponged with Crumb Cake ink around the edges.
2. I adhered the bevelled window pane with mini glue dots because I couldn't think of a better way to keep it in place. If you know a better way, please let me know in the comments. Thanks!
3. Those spots either side of the sentiment are rhinestones.

Stuff Ups:
1. The muffins are a little big to fit under the window pane properly.
2. The confetti cardstock is gorgeous - full of little bits so it looks recycled. Unfortunately one of those bits looks like a red splotch above the sentiment, oh well.
3. The glue dots show through the window pane.
4. Probably should have positioned the centre panel lower and cut the ribbon shorter.

Pleasant Surprises:
1. I like the blue cardstock. It was a bit flimsy but the colour is pretty.
2. The muffins are cute and my colouring in was not atrocious.

Happy Easter

I have something different to show today - not a card! I decorated a tag. I've never used tags for anything so this was new to me. I'm only moderately happy with it. The concept was better in my head, the execution of it isn't great. Oh well, I tried!

Here's a closer view of the tag:

Materials:

Cardstock: Whisper White, Tempting Turquoise, Tangerine Tango, So Saffron, Pear Pizzazz (or Kiwi Kiss, not sure), Chocolate Chip and Pink Passion (I think it's retired).
Ink: Tempting Turquoise, Versamark, markers - Tempting Turquoise, Blushing Bride, Crumb Cake, Wild Wasabi, Melon Mambo, Elegant Eggplant, Tangerine Tango, So Saffron.
Stamps: Greetings Eight (Stampin' Up), Jessie's ABC's (Lawn Fawn).
Accessories: Chipboard glitter tag (don't know the brand - it's so old!), Orange organza ribbon (Kaiser Craft), antique gold embossing powder.
Tools: Heat tool, embossing static pillow, dimensionals, big shot machine, sponge, lattice embossing folder (Stampin' Up), paisley and swirly embossing folders (Sizzix), polka dot and bubble embossing folders (Cuttlebug), paper snips, oval punch, glue tape.

Tips and Tricks:
1. I heat embossed the Happy Easter sentiment and bunny first.
2. Then I sponged around the tag and let it dry.
3. I punched and embossed the coloured Easter eggs (yes, that's what they are meant to be!).
4. After positioning the Easter eggs with glue tape I trimmed off the excess and sponged around the edges.
5. The bunny was added on dimensionals. Dimensionals are also used to adhere the tag to the jar.

Stuff Ups:
1. The overall result - just not thrilled.
2. The 't' in Easter is upside down. *sigh*
3. Maybe the Easter eggs should have been smaller so they actually look like Easter eggs.

Pleasant Surprises:
1. The bunny is cute and I managed to cut it out nicely.
2. The sponging on the tag itself was nice (just the tag, not the eggs).
3. The heat embossing turned out nicely.

Happy St Patrick's Day

It's not often that I make a card that I don't intend to give away but here's one. I want to keep this one for my own collection. It's not my design - I found the design at Card Scraps. I thought it was so simple yet cute!

Here's my very slightly modified, not nearly as good version:

Happy St Patrick's to you all! Have a great day!

Materials:
Cardstock: Garden Green, Crumb Cake, Whisper White.
Ink: Garden Green.
Stamps: So Happy For You, Teeny Tiny Sentiments.
Accessories: Green organza ribbon (Kaiser Craft).
Tools: Big shot machine, Top Note die, Lattice embossing folder, scissors, bone folder, tape runner, scallop oval punch, oval punch, paper trimmer, dimensionals.

Tips and Tricks:
1. Stamp the four leaf clover on the Whisper White card then cut with the Top Note die.
2. Run the die cut through the Big Shot in the lattice embossing folder.
3. Trim the die cut along the perforation so it fits nicely on another Top Note die cut.
4. Glue it altogether. Easy!

Stuff Ups:
1. The stamped image isn't as solid as I would like. If I had time I might have coloured over them with a marker.
2. I still can't tie bows properly or straight.

Pleasant Surprises:
1. Just that I feel it's strikingly effective!
 

Playing with a new stamp set

I broke out another unused stamp set today - Simply Soft. It features pretty detailed flowers and has 2 step stamps (I didn't 2 step them today though). This design belongs to Lana Harvey from Lana's Stampin' Cottage. I loved her card so much I didn't change anything except to suit my own supplies.

I made two colour variations:

We'll call this card 1.

And this is card 2.

Materials:
Cardstock: Card 1 - Very Vanilla, Lovely Lilac (retired Stampin' Up colour). Card 2 - Whisper White, Island Indigo.
Ink: Lovely Lilac, Island Indigo, Stazon black, Old Olive marker.
Stamps: Simply Soft.
Accessories: Victoria crochet trim, Basic Pearls, Blue organza ribbon (Kaiser Craft).
Tools: Big shot machine, Vintage Wallpaper embossing folder, Top Note die, sponge, aquapainter, Beautiful Wings embosslit, mini glue dots.

Tips and Tricks:
1. I cut the top notes before stamping the images on.
2. I used an aquapainter to colour the flower heads and buds. I used an Old Olive marker for the stems and leaves.
3. The stamped top notes and Vintage Wallpaper layers are sponged with the feature colour (Lovely Lilac or Island Indigo).
4. I'm not good at tying bows so the ribbon is adhered in two parts. A length is cut and stretched across the front of the card. The ends are taped behind the card layer. Another length is used to tie a bow around the first part. Hey, it works for me!
5. Card 1 would look so much better with matching ribbon but I didn't have any.

Stuff Ups:
1. I would have used the 2 step stamps but forgot to use my stamp-a-ma-jig on the outline stamp. It was fun to aquapaint any way.
2. I would use Certainly Celery or another light green marker rather than Old Olive. I feel it is too dark for the look that I want.
3. The sponging is uneven but I can live with it.

Pleasant Surprises:
1. The overall look of the aquapainting is ok.
2. The way the organza ribbon matches the Island Indigo was a lucky surprise! It looks lighter than the cardstock in the photo but that's due to the nature of the ribbon versus the camera. In real life it matches perfectly.

New Stampin' Up colours

When I saw this card design I loved it for two reasons - 1. The colours it uses are the new In Colors for Stampin' Up, some of which I haven't used yet. 2. It features a stamp set that I have and hadn't used yet either.

So this card design is not mine, I found it while searching for some inspiration. It's made by Nancy Riley, click on her name to check out the card that she made. Here's my version of her card:

This is for my sister-in-law.

Materials:
Cardstock: Wisteria Wonder, Pool Party, Lucky Limeade, Whisper White.
Ink: Wisteria Wonder, Calypso Coral.
Stamps: Array of Sunshine (Stampin' Up) and Sophie's Sentiments (Lawn Fawn).
Accessories: (This used to be called 'other')  Basic pearls, ribbon (American Craft),
Tools: (This is a new section) Beautiful Wings embosslits, Circle punch, bird punch, scallop edge punch (Fiskars), Lattice embossing folder, 2 way glue pen, dimensionals, mini glue dots, scissors, double sided tape, big shot machine, Scoring board (Martha Stewart).

Tips and Tricks:
1. The branches and leaves were punched with the bird punch. I ran them through the big shot machine in the lattice embossing folder. I used a 2 way glue pen to adhere them to the card.
2. The coral flower was stamped 3 times and cut out. On two of the flowers, I've just cut out the inner sections and layered them with dimensionals.
3. The circles are glued on with a 2 way glue pen as I don't want the edges to lift up. A tape runner wouldn't get close enough the the circle's edge.
4. The butterflies are stuck on with mini glue dots.

Stuff Ups:
1. Originally I used a Vintage Wallpaper embossed piece of Wisteria Wonder instead of the circles but it was too busy for the look that I wanted.
2. When I finished the card, I had a sip from my can of Coke Zero and a drop of condensation landed on my card - oh no!! I got out my heat tool to dry it and it only let the faintest of watermarks. Silly me.
3. Looking at the card now, maybe I should have stuck the lowest branch over the ribbon instead of under it?

Pleasant Surprises:
1. I'm pleased with the overall look of the circles. I like that textured effect.
2. The ribbon matches the Pool Party butterflies nicely.
3. For once my cutting out was not too shabby!

The last of the brown (for now)

So I made this card for my friend Tracey whose birthday is today (Happy birthday Trace!) and my husband said it's nice but I've been using too much brown lately (yeah, brown has been my neutral colour of choice, mainly because I bought a whole pack of it). I thought this sounded like a challenge (in a warped kinda way) so I'm making cards without brown for a little while! This is the last of the brown for now:

The design of this card is from an old Stampin' Up catalogue. I've tweaked it to suit my whims.

Materials:
Cardstock: Chocolate Chip, Crumb Cake, Whisper White, Elegant Soiree DSP.
Ink: Versamark, Memento Tuxedo Black, Crumb Cake.
Stamps: Blissful Botanicals and Sophie's Sentiments by Lawn Fawn.
Other: Fiskars Eyelet border punch, Victoria crochet trim (I've called it lace in the past but it's not really called that), Perfect Pearls Mist in Heirloom Gold, American Craft ribbon, circle punch, Basic pearls, Big Shot machine, Beautiful Wings embosslit, mini glue dots, sponge, Fiskars corner rounder punch.

Tips and Tricks:
1. I lightly misted the Whisper White panel with the Perfect Pearls and let in dry before stamping on the sentiment.
2. I sponged around the butterflies with Crumb Cake ink.

Stuff Ups:
1. I messed up the alignment of the border punch so I had to do that again.

Pleasant Surprises:
1. I got the sentiment stamped correctly, first time! Gosh, I love Lawn Fawn stamps!!

For my new nephew

This card took me hours to make, mainly because I couldn't think of a design that I liked. I kept playing with layouts, different colour schemes and papers. None felt right. Eventually I came up with this card. I've made it for my niece who gave birth to a gorgeous baby boy on Friday! I am posting this card and a present to her tomorrow.

My card also qualifies to be part of a sketch challenge from Lily Pad Cards, yay! Here's the link to the challenge - Sketch Challenge.

Here's the sketch:

This is also the first baby card I've ever made. I broke out some new Lawn Fawn stamps for the occasion.

Materials:
Cardstock: Bashful Blue, Brushed Silver, Whisper White, watercolour paper.
Ink: Bashful Blue, Versamark, Basic Black, Stazon Black.
Stamps: 'Plus One' and 'Quinn's ABCs' by Lawn Fawn.
Other: Big shot machine, Top Note die, silver embossing powder, aqua painter, white organza ribbon, sponge, Circle cutter by Martha Stewart, mini glue dots, clear Bitty buttons.

Tips and Tricks:
1. I cut a top note die cut with my big shot machine. I stamped the rattle in Bashful Blue to make my own background. The top note die cut was adhered to the Brushed Silver layer. I trimmed the end offs of the die cut.
2. The pram and Charlie's name are stamped with Versamark on water colour paper and embossed with silver embossing powder. I used an aqua painter to colour them in. The wheels on the pram are water coloured with Basic Black ink which has taken on a purplish hue once it was watered down. Bitty buttons are adhered to the pram wheels with mini glue dots.
3. Charlie's name is layered on a piece of Bashful Blue cardstock which is adhered to the top note die cut. This covers up the top of the die cut and gives Charlie's name some dimension without using foam dots.
4. I sponged around the watercolour paper for Charlie's name and the pram with Bashful Blue ink which hasn't shown up in the photo.
5. I placed a mini glue dot behind the knot of the bow to help keep it flat and secure.
6. Lining up the stamps in Charlie's name and the sentiment took some time and tweaking. I tested the position of the stamps with ink on scrap paper until I was happy with the alignment.
7. I tested Memento's Tuxedo Black and Black Stazon on the silver cardstock and found that Stazon gave a blacker, more opaque black than Memento so I went with Stazon.

Stuff Ups:
1. I stamped and embossed Charlie's name many times in my quest to find a style I liked. I used different inks and colours, tried cutting out the letters, coloured the letters with markers, it all took a long time.
2. Some of the rattles didn't stamp properly so I filled in any missing parts with a Bashful Blue marker.
3. I have trouble using Martha's circle cutter so it took me a few attempts to get usable circles.
4. Being a teacher, the lack of capitalisation on the 'congrats' stamp and for Charlie's name does irritate me but I didn't make the stamps so I'll have to live with it. If Lawn Fawn made a Quinn's capitals stamp set, I'd buy it in half a heart beat. Maybe I should suggest it, lol!

Pleasant Surprises:
1. The whole card - didn't think it would look this good (if I do say so myself). My cards are usually pretty average and never look as good as all the other blogs out there. The acid test was my husband's reaction. Rather than, "Oh that's nice honey, very good!" (which I love hearing) I got, "Wow! That's awesome!" He sounded so surprised! I'm so proud of this card!

Motorcycle

I was checking out The Daily Marker today and Kathy recommended visiting Lily Pad Cards. I hopped across and loved it so I decided to enter their colour challenge. This is the first challenge I've entered so I'm excited! Here's the challenge link: Lily Pad Cards - Color Palette Challenge.

I made this card today and will be mailing it tomorrow to my brother-in-law for his birthday. Happy birthday Bob!

It's probably the first time I haven't included a sentiment on the front of a card. I just couldn't see where it would fit. This card is a Kate original, I haven't cased anything.
I also learnt (from Lily Pad Cards) the value of photographing my cards against a light, plain background rather than my dark, wooden hutch.

Materials:
Cardstock: Night of Navy, Cajun Craze, So Saffron.
Ink: Night of Navy, Cajun Craze, So Saffron, Versamark.
Stamps: Motorcycle, 'To a Classic'.
Other: striped grosgrain ribbon in Night of Navy, dimensionals, clear embossing powder, embossing buddy, heat tool, sponge, sticky strip.
Non Stampin' Up: corner rounder punch by Fiskars.

Tips and Tricks:
1. I used the emboss resist technique for the motorbike layer. I sponged over the clear embossed image with Cajun Craze and Night of Navy ink.
2. I used a sponge to ink around the cardstock layers with Night of Navy ink.
3. I used the speedometer stamp from 'To a Classic' as the background stamp on both the base card and So Saffron ribbon layer. The speedometer images on the So Saffron cardstock are clear embossed.
4. I pulled some threads from the ribbon to make it bunch up and stuck the bunched ribbon down on a piece of sticky strip. I secured the ends underneath the cardstock.

Stuff Ups:
1. It took me ages to get the ribbon layer the way I wanted it. I tried folding the ribbon in half lengthways and gluing it flat. I didn't like it. I tried bunching up the folded ribbon and gluing it down. I didn't like that either. Finally I tried the pulled thread method with a new piece of ribbon and was happy with that.
2. I had to fight the urge to bling up this card with brads and rhinestones. I thought it would be too much and didn't want it to look over the top. I hope I made the right decision there.

Get Well Soon

This card was inspired by a card from an old Stampin' Up catalogue. I changed the colour scheme, stamps and ribbon, did some heat embossing and ended up with a result with which I am pleased.
I also broke out my new Lawn Fawn stamps and I am in love with them! They have a very different stickiness to them that I've never come across before with clear stamps - fun to poke and play with! The ink doesn't pool like on normal clear plastic stamps - it goes on smooth and crisp! Very pleased! You will be seeing more Lawn Fawn stamps here soon.

I made two of these: one as a thank you for my line manager and this for my Mother-in-law.

I watched a few ribbon tying videos on Youtube and I think I am on my way to ribbony happiness.

Materials:
Cardstock: Chocolate Chip, Blushing Bride textured and plain, Kiwi Kiss textured and plain, Very Vanilla, Crumb Cake.
Stamps: Cottage Garden.
Ink: Chocolate Chip, Blushing Bride, Kiwi Kiss, Versamark.
Other: Basic pearls, Mat pack, Paper piercer, mini glue dots, dimensionals, stamp-a-ma-jig.
Non Stampin' Up: Sophie's Sentiments stamp set by Lawn Fawn, organza ribbon, Fiskars corner rounder punch, clear embossing powder, heat tool.

Tips and Tricks:
1. I wasn't planning on using the stamp-a-ma-jig but I accidentally stamped the 2 step flower perfectly (lol) and liked it so much I dragged out the stamp-a-ma-jig and did the rest of the flowers properly. The first step I stamped in the coloured ink and the second step (the outlined flower stamp) I stamped in Versamark, coated with clear embossing powder and heat embossed.
2. A mini glue dot secures the ribbon under the bow.
3. Basic pearls finish off the flower centres including the tiniest pearls for the flowers near the sentiment.
4. The mat pack hole guide was used for the paper piercing.

Stuff Ups:
1. I admit I took ages trying to line up the 2 step flower stamps before giving up and using the stamp-a-ma-jig. I got the green and brown ones fine but the pink just wouldn't match up.
2. The ribbon looks a bit kinked so maybe I should have ironed it.
3. I should have used some tombow or a glue pen rather than my tape runner for the green strip because the strip was too narrow. A teeny bit of glue can be seen from the front. Probably is not noticeable but enough to annoy me.

Special 50th

This card was made for my Brother-in-law who celebrated his 50th birthday recently. It is similar to the card I made for my husband on his birthday but has been tweaked quite a bit. It looks much better in real life as it's difficult to photograph silver cardstock properly.

I really didn't want to give this one away, I became too attached to it!! You'll notice that I've been going nuts with my rounded corner punch lately!

Materials:
Cardstock: Brushed Silver, Very Vanilla, More Mustard.
Ink: Versamark, Chocolate Chip, More Mustard marker.
Stamps: Cheers To You.
Other: Silver embossing powder, heat tool, dimensionals, Hemp twine, Very Vanilla satin ribbon, Clear embossing powder,
Non Stampin' Up: Put On Your Party Hat stamp set by Fiskars (for the candle numbers), Kilometric gold and silver gel pens, paper by Kaiser craft, Ranger medium pen (embossing pens), Fiskars corner rounder punch (much better than my SU one), White Fizz glitter, heat and set powder.

Tips and Tricks:
1. I embossed the sentiment 'Cheers to you' in silver on the silver cardstock and I gotta say, it looked super cool!
2. I used my Ranger medium pen like a Versamarker and coloured in the beer foam with it. Then I applied heat and set powder, heated it with the heat tool, applied the White Fizz glitter and heated it again to set it.
3. The hemp twine wrapped around the Vanilla ribbon gives a more masculine touch I think.
4. The 50th candles were embossed in silver and coloured in with silver gel pen. The flames were coloured in with gold gel pen. These gel pens were nice and thick - gave good coverage but that means give the ink heaps of time to dry properly.

Stuff Ups:
1. Apart from having to stamp the beer mugs a few times to get crisp images, I did ok with this one, no major hassles!
2. Hang on, I forgot that I had to redo the 50th image because I smudged the wet silver gel ink.

Sew Nice to Stamp!

I've broken in another new stamp set - Sew Suite. This card was made for my Grandma, it's her birthday today and I'm visiting her tomorrow. I did want to make a bright, happy card and I think this fits the bill. It's a Kate original:

I've used quite a lot of things to create this card. It's one of the fussiest cards I've ever done.

Materials:

Cardstock: Melon Mambo, Yoyo Yellow (retired), Whisper White, Island Oasis DSP, watercolour paper.

Ink: Versamark, Stazon black, Pacific Point, Melon Mambo, Pumpkin Pie, Crumb Cake, Daffodil Delight, Sahara Sand marker.

Stamps: Sew Suite, Teeny Tiny Sentiments.

Other: Big Shot machine, Vintage Wallpaper embossing folder, heat tool, dimensionals, sponge, White Uniball gel pen, Ice Cream Parlor ribbon (American spelling), Ice Cream Parlor buttons, mini glue dots, aqua painter.

Non Stampin' Up: Clear embossing powder, non stick craft sheet.

Tips and Tricks:

1. For the sewing machine and cotton reels, I stamped them on the Versamark ink pad, then in Stazon Black, then onto the watercolour paper. I added clear embossing powder and heat embossed the images.

2. I used my Stampin spots to dab ink onto the craft sheet and used that ink for the water colouring.

3. The buttons are threaded with pieces of Whisper White cardstock and adhered with mini glue dots. The glue dots also keep the paper threads in place.

Stuff Ups:
1. The faux stitching around the outside. I practised on scrap cardstock first and it looked acceptable but when I started to do it on the card, it all got messed up. The cardstock was too light and my lighting was too bad to see what I was doing properly. I have learnt that it works best on darker cardstock (as it did in my practise session) and with smaller stitches. I need to learn how to 'corner' properly. I need to make the stitches consistently the same size and in a straight line. I feel I almost wrecked the card with the stitching I did at the end.
2. I used a Sahara Sand marker to trace around the sewing machine to cover up some leaked ink from my water colouring, but I wish I had just left it plain.
3. I forgot to position the buttons tag lower (I nearly forgot to use it completely!) which meant the sentiment didn't fit. As a result I had to cut it out from its nice modern label punched tag. I sponged around it and jammed it in the corner. I think it's ok but not what I had planned to do.
4. Maybe placing three buttons under the ribbon as well as on top would better balance out the card? I'm not sure. I don't want the buttons to dominate the whole card.
5. My cutting out could be better. At the very least, I could try a technique that I've seen on YouTube - after cutting out the images, run around the cut edge with the side of a black marker tip so you don't see the white core.
6. I think I can see a dimensional poking out from under a cotton reel.

I know I sound quite critical but I really am pleased with this card, apart from the faux stitching that is.

A Venture in Layering

I've been wanted to try a few new techniques lately and I'm always looking for the opportunity to use them. For this card I wanted to try a bit of layering. Not sure what the official term is, but I'm using layering to describe the building of ink, stamps and/or embossing on cardstock. This first attempt turned out to be a bit light handed but I'm happy with what I have done none the less.

I did break out my brand new and desperate to try product - scented embossing powder! I bought it (and many others) from gel-a-tins. It smells just like a vanilla latte. Apparently the scent will last for 3 weeks. The colour is white with brown specks. You can't really see it in the photo, I probably should have used a darker embossing powder (such as Chocolate Bliss or Can't Catch Me Gingerbread).

Grandad's birthday - hope he enjoyed it and liked my card. Here's the recipe:

Materials:
Cardstock: Chocolate Chip, Very Vanilla, Newsprint DSP.
Ink: Chocolate Chip, Versamark.
Stamps: Bliss, Teeny Tiny Sentiments, Wonderful Favourite.
Other: Early Espresso striped grosgrain ribbon, oval punch, scallop oval punch, dimensionals.
Non Stampin' Up: Perfect Pearls mist in Heirloom Gold, Gelly powder - Extra Foam Vanilla Latte scented embossing powder from gel-a-tins. (The website is a little bit buggy at the moment but I'm sure it will be fixed soon.)

Tips and Tricks:
1. The layering - I've seen a lot of cards out there with a lot going on with the DSP - inking, embossing, distressing, etc, so I had a go at it myself:

• First I misted my DSP with water and then crinkled and screwed it up.
• Next I sprayed it with Perfect Pearls mist in Heirloom Gold and let it dry.
• Then I stamped an image from the Bliss stamp set in Versamark and applied the scented embossing powder. I heat embossed it.
• After that I stamped the bird from Bliss in Chocolate Chip ink randomly over the DSP.

2.  I stamped another bird in Chocolate Chip on Very Vanilla cardstock, cut it out and popped it up on dimensionals in the bottom right hand corner.

Stuff Ups:
1. As I've said already, I should have chosen a darker embossing powder - I was too cautious.
2. Same with the Perfect Pearls mist - I should have used more.
3. The sentiments aren't aligned properly. They are three separate stamps and you can tell. The happy birthday one is also too high and nearly cut off by the punch.

Father's Day 2 Ways: Part 2

For this card I knew I wanted to play with two of my new Stampin' Up items - Elegant Soiree DSP and the 'To a Classic' stamp set. They may be retired now (since the new catalogue came out) but I still only just bought them. This card is a Kate original and here is the result:

There's a lot of colours mixed up here so I hope I've gotten away with it. I really wish I had the correct coloured cardstock but I didn't so I had to substitute for some retired cardstock.

Materials:
Cardstock: Elegant Soiree DSP, Chocolate Chip, Very Vanilla, Bashful Blue or Brocade Blue (sorry don't know which!)
Ink: Chocolate Chip ink pad, Chocolate Chip marker, Marina Mist marker.
Stamps: To a Classic, Teeny Tiny Sentiments.
Other: Early Espresso striped grosgrain ribbon (think it's retired now), scallop oval punch, oval punch, dimensionals, paper piercer, mat pack.
Non Stampin' Up: Brown/bronze brads, aqua painter.

Tips and Tricks:
1. The car and checkered pattern are the same stamp and in between them (on the stamp) is the sentiment 'happy birthday to a classic' (I think) which, of course, I didn't want on a Father's day card. I used markers to ink up the stamp.
2. I used Marina Mist ink and an aqua painter to lightly shade in the car.
3. I tried to make a 'dashboard dial' effect with the sentiment layers.
4. The car layer is popped up on dimensionals to accomodate the brads and ribbon underneath.

Stuff Ups:
1. The car image - I should have either clear embossed the image first or used watercolour paper because the ink started to bleed when I added the water via the aqua painter. After it dried I touched up the image with the marker which hid a multitude of sins!
2. I've run out of Baja Breeze cardstock - I had to substitute with old retired stuff instead.
3. I've run out of Early Espresso cardstock - I had to substitute it with Chocolate Chip instead.
3. Probably should have used four brads to balance out that top layer.
4. The ribbon should have been a bit tighter but wrapping it around paper was difficult due to its flimsiness.

Pleasant Surprises - Ooh, a new heading!
1. I managed to align the 'Happy Father's day' and 'dad' stamped images the first time I stamped them!

My poor hubby!

My lovely hubby had an operation last week and I made him a get well card for his stay in hospital. This card was kind of a challenge as I had only a small bag containing my most basic card making items in it. I knew I wanted to use my new French Foliage stamp set and some colours from the Regals collection. I threw in some things that I thought would work and this is the result:

Materials:
Cardstock: Crumb Cake, Very Vanilla.
Ink: Always Artichoke, Not Quite Navy, Bravo Burgundy, Versamark.
Stamps: French Foliage, So Happy For You.
Other: None
Non Stampin' Up: Charcoal grosgrain ribbon, black rhinestones, Perfect Pearls Mist in Heirloom Gold, edge distresser tool.
 
Tips and Tricks:
1. After I stamped the card base, I spritzed the card with the Perfect Pearls mist for a nice gold sheen. You can see it above the sentiment layer where the camera flash highlights it.
2. I also spritzed the sentiment layer after crumpling the cardstock because it was too bare and new.
3. Some of the leaves have been stamped after first stamping off on a scrap piece of paper. This softens the colour and produces a lighter effect.
4. The Versamark has been used to stamp splodges from the French Foliage set over the leaves, on the sentiment layer and inside the card.

Stuff Ups:
1. I originally used the masking technique to create the background of leaves and gold spritz and left a blank centre rectangle for the sentiment but it didn't look right. Essentially, the Very Vanilla hides some mistakes. The Very Vanilla cardstock may be too bright and I could have used more Crumb Cake I suppose. I didn't have any with me and I like the Vanilla as it is.
2. The charcoal ribbon doesn't quite match but I don't have any black.
3. The placement of the rhinestones could be more precise.
4. I need to learn how to make pretty bows instead of snaggly lopsided ones!

A Little Birthday

I don't have much of a call for kids cards as there simply aren't many kids in our family right now - only two. This card I designed for the youngest kid - he has just turned two. I must get some more kid oriented stamps for future years.

This card was inspired by a set of decorative brads I bought featuring cute balloons and birthday cake slices. I didn't end up using any of those on the cover! The blue stars and the big round brads are from that set though.

Materials:
Cardstock: Shimmery White, Gable Green (retired), Real Red, Pacific Point, Whisper White.
Ink: Pacific Point (ink and marker), Pumpkin Pie (marker), Real Red (marker), Daffodil Delight (marker), Chocolate Chip (marker), Versamark, Stazon black.
Stamps: None that are from Stampin' Up.
Other: Pumpkin Pie taffeta ribbon, Lattice embossing folder, big shot machine, Paper piercing tool, mat pack, sponge, dimensionals.
Non Stampin' Up: Fiskars clear stamps - Cookies, Cake & Ice Cream stamp set, Put On Your Party Hat stamp set, Square scallop punch, Doodlebug Designs brads, Fiskars Cupcake border punch.

Tips and Tricks:
1. The scallop squares have Pacific Point ink sponged around the edges to liven them up a little. The squares are also popped up on dimensionals.
2. The stamps on the scallop squares were all stamped in Versamark, then Stazon black, then heat embossed. I find that makes colouring them in easier. The images were all coloured in with markers.
3. Shimmery White is a lot thicker cardstock than Whisper White so I always choose it for a card base.

Stuff Ups:
1. The main reason for the green panel is that the lattice embossing folder doesn't reach to the bottom of the card and I needed a way to hide it.
2. I was going to have more of the green colour in the stamped pictures on the scallop squares but I forgot that I didn't have a marker in that colour. Thankfully there is a little green in those big brads to tie it in better. I also used the green inside the card to make a layer to cover up the back of the brads and that unembossed portion.
3. I kind of wish I used a different colour than green so I could make that cupcake border stand out more. It looks a bit grass and picket fencey to me. Having said that, using blue or red would be too much. Orange would make the ribbon pointless....yellow maybe? Brown?

Dad's Birthday

Tomorrow is Dad's birthday, happy birthday Dad! I wanted to make a card about golf since Dad loves golf. While I was looking for inspiration, I found a card design that I loved! It wasn't a golf card but I used what I had to make it kate-ified. The original design is from Create With Christy.

Materials:
Cardstock: Pacific Point, Cherry Cobbler, Chocolate Chip, Very Vanilla.
Stamps: Curly Cute (on the inside as the sentiment).
Inks: Cherry Cobbler classic ink pad.
Other: Big shot machine, Lattice embossing folder, dimensionals, mat pack, paper piercing tool, 2 way glue pen.
Non Stampin' Up: The follow products were bought from Crafty Cards on Garling - golf ball brads (the big, round, white things - the camera doesn't do them justice!), brown grosgrain ribbon, 3D golf stickers by Wishmade. I also used Thickers Fabric chipboard letter stickers in Doll. The bronze brads were from Stampin Stuff. Clear stamps 'Golfer' from http://www.sullivans.net/ though I bought mine from Starfish Lane in Mt Lawley.

Tips and Tricks:
1. On the big tag, I used 2 way glue to adhere the blue cardstock to the red before running it through the big shot machine.
2. The big tag was cut with a paper trimmer. I tried to cut the corners off at right angles to get them even.
3. I used Very Vanilla cardstock to make the white golf balls stand out more. You could substitute that for Whisper White depending on your project.

Stuff Ups:
1. I used the guides that came with the mat pack to align my brads but I still managed to make them look wonky.
2. The tag is too long - if it were shorter, the word 'Dad' would fit better but I made the tag first and forgot to check the height of my letters.

Mother's Day

I simply adore this Mother's Day card, however, I cannot lay claim to the gorgeous design. This design is by the incredibly talented Angie Brown from Stampin' Dreams. I loved it from the second I saw it and knew it would be perfect for my Mum for Mother's Day. It also has a lot of elements to it and not a lot of stamping.

The main differences between my card and Angie's are that I didn't have the same sentiment stamp as Angie so I lowered the placement of the bird and branches, and popped my sentiment up on the modern label punch out (my fave!). Also my white embossing powder was clumpy so I chucked it out (it was useless) and as a result I don't have that pretty detail on the bird's wing. I used plain old Versamark instead.

Here's the procedure:

Materials:
Cardstock: Shimmery White, Bashful Blue, Night of Navy. You could use Whisper White but the Shimmery White is much thicker cardstock and I feel it makes for a sturdier base card.
Inks: Bashful Blue ink spot, Night of Navy ink spot, Versamark.
Stamps: Vintage Vogue, Teeny Tiny Sentiments.
Other: Big shot machine, Top note die, Whisper White satin ribbon, Modern Label Punch, Bird punch, sponge, stick on pearls, retired triple flower punch, dimensionals, 2 way glue pen.
Non Stampin' Up: Polka dots embossing folder by Cuttlebug, black permanent marker.

Tips and tricks:
1. I sponged around the edges of the top note die cut, bird body and modern label punch out piece using Bashful Blue ink.
2. I punched 7 branches out of Night of Navy cardstock using the bird punch. I trimmed them to fit the way I wanted and glued them down with the 2 way glue pen.
3. I coloured a basic pearl with black permanent marker to create the bird's eye.
4. I've mentioned it before, the satin ribbon frays as soon as you look at it so handle it as little as possible.
5. I used Night of Navy ink to stamp the sentiment. I didn't think Bashful Blue was powerful enough.

Stuff Ups:
1. As I said, I was planning to emboss the stamping on the bird's wing in white and then sponge over it with Bashful Blue but my embossing powder was clumpy and no good. It wouldn't stick properly to the Versamark.
2. The Polka dot embossing folder was a little too small for the layer size that I wanted so one end is a little bit sparse with dots.
3. My SNAIL adhesive is really hard to use. It just doesn't want to turn and it is starting to dent my cardstock. It's very disappointing. I also left my back up double sided tape at work so I had to use my precious mini glue dots on the back of the polka dot embossed layer. Using tape rollers can flatten your embossing so it's always best to use peel-the-backing-off it tape (known as Sticky Strip in the Stampin' Up world).
4. My layers are always skewiff, never proportional.