Happy New Year

Welcome to 2012 everyone!
This card is for my Mother-in-law who is in hospital again and we will be visiting her tomorrow. It's quite similar to my last card but I tried a few different techniques on this one.

I did consider colouring the flowers in different shades and tints of purple but since this is a 'get well' card, I wanted it to look more colourful than monochromatic.

Materials:
Cardstock: Shimmery White, Concord Crush, Whisper White, Watercolour paper, In-colour 2010-2011 DSP: Concord Crush.
Ink: Wisteria Wonder, Memento's Tuxedo Black, markers - So Saffron, Melon Mambo, Regal Rose, Pretty in Pink and Old Olive, Versamark.
Stamps: On The Mend by Lawn Fawn.
Other:  Basic Rhinestones, clear glitter embossing powder, dimensionals, sponge, Pink Sorbet baker's twine by The Twinery.

Tips and Tricks:
1. Bandaid background - I clear embossed the bandaids. If I had distress inks, I would have used them for the background colour but I don't so I used a sponge and ink pad. I also used the same technique on the flower panel.
2. The vase is paper pieced.
3. I used the Pretty in Pink marker to add rosy cheeks to the flowers.

Stuff Ups:
1. The bandaid stamping is pretty terrible - unevenly spaced, overlapping in parts.
2. The embossing is terrible too - I missed bits and smudged the Versamark when I was sponging. Fortunately most of those bits are covered by the flower panel.
3. I seriously need a lamp because the lighting in my craft room sucks!!
4. On my first attempt at making the flower panel I tried watercolouring the flowers but I guess I didn't let the Tuxedo Black ink dry long enough as it started to run when the aquapainter hit it.

Special 50th

This card was made for my Brother-in-law who celebrated his 50th birthday recently. It is similar to the card I made for my husband on his birthday but has been tweaked quite a bit. It looks much better in real life as it's difficult to photograph silver cardstock properly.

I really didn't want to give this one away, I became too attached to it!! You'll notice that I've been going nuts with my rounded corner punch lately!

Materials:
Cardstock: Brushed Silver, Very Vanilla, More Mustard.
Ink: Versamark, Chocolate Chip, More Mustard marker.
Stamps: Cheers To You.
Other: Silver embossing powder, heat tool, dimensionals, Hemp twine, Very Vanilla satin ribbon, Clear embossing powder,
Non Stampin' Up: Put On Your Party Hat stamp set by Fiskars (for the candle numbers), Kilometric gold and silver gel pens, paper by Kaiser craft, Ranger medium pen (embossing pens), Fiskars corner rounder punch (much better than my SU one), White Fizz glitter, heat and set powder.

Tips and Tricks:
1. I embossed the sentiment 'Cheers to you' in silver on the silver cardstock and I gotta say, it looked super cool!
2. I used my Ranger medium pen like a Versamarker and coloured in the beer foam with it. Then I applied heat and set powder, heated it with the heat tool, applied the White Fizz glitter and heated it again to set it.
3. The hemp twine wrapped around the Vanilla ribbon gives a more masculine touch I think.
4. The 50th candles were embossed in silver and coloured in with silver gel pen. The flames were coloured in with gold gel pen. These gel pens were nice and thick - gave good coverage but that means give the ink heaps of time to dry properly.

Stuff Ups:
1. Apart from having to stamp the beer mugs a few times to get crisp images, I did ok with this one, no major hassles!
2. Hang on, I forgot that I had to redo the 50th image because I smudged the wet silver gel ink.

Sew Nice to Stamp!

I've broken in another new stamp set - Sew Suite. This card was made for my Grandma, it's her birthday today and I'm visiting her tomorrow. I did want to make a bright, happy card and I think this fits the bill. It's a Kate original:

I've used quite a lot of things to create this card. It's one of the fussiest cards I've ever done.

Materials:

Cardstock: Melon Mambo, Yoyo Yellow (retired), Whisper White, Island Oasis DSP, watercolour paper.

Ink: Versamark, Stazon black, Pacific Point, Melon Mambo, Pumpkin Pie, Crumb Cake, Daffodil Delight, Sahara Sand marker.

Stamps: Sew Suite, Teeny Tiny Sentiments.

Other: Big Shot machine, Vintage Wallpaper embossing folder, heat tool, dimensionals, sponge, White Uniball gel pen, Ice Cream Parlor ribbon (American spelling), Ice Cream Parlor buttons, mini glue dots, aqua painter.

Non Stampin' Up: Clear embossing powder, non stick craft sheet.

Tips and Tricks:

1. For the sewing machine and cotton reels, I stamped them on the Versamark ink pad, then in Stazon Black, then onto the watercolour paper. I added clear embossing powder and heat embossed the images.

2. I used my Stampin spots to dab ink onto the craft sheet and used that ink for the water colouring.

3. The buttons are threaded with pieces of Whisper White cardstock and adhered with mini glue dots. The glue dots also keep the paper threads in place.

Stuff Ups:
1. The faux stitching around the outside. I practised on scrap cardstock first and it looked acceptable but when I started to do it on the card, it all got messed up. The cardstock was too light and my lighting was too bad to see what I was doing properly. I have learnt that it works best on darker cardstock (as it did in my practise session) and with smaller stitches. I need to learn how to 'corner' properly. I need to make the stitches consistently the same size and in a straight line. I feel I almost wrecked the card with the stitching I did at the end.
2. I used a Sahara Sand marker to trace around the sewing machine to cover up some leaked ink from my water colouring, but I wish I had just left it plain.
3. I forgot to position the buttons tag lower (I nearly forgot to use it completely!) which meant the sentiment didn't fit. As a result I had to cut it out from its nice modern label punched tag. I sponged around it and jammed it in the corner. I think it's ok but not what I had planned to do.
4. Maybe placing three buttons under the ribbon as well as on top would better balance out the card? I'm not sure. I don't want the buttons to dominate the whole card.
5. My cutting out could be better. At the very least, I could try a technique that I've seen on YouTube - after cutting out the images, run around the cut edge with the side of a black marker tip so you don't see the white core.
6. I think I can see a dimensional poking out from under a cotton reel.

I know I sound quite critical but I really am pleased with this card, apart from the faux stitching that is.

Hubby's Birthday

Well it's two male birthday cards in a row! It's my husband's birthday in two days time and we will be in Bali celebrating it! This is hot off the press, just finished. I'm giving Jason his presents tomorrow so I don't have to take them on the plane. This is a pure Kate creation:

I'm thrilled with the result because it was looking decidedly dodgy for a while. It all came together in the end.

Materials:
Cardstock: Basic Black, Basic Grey, Going Grey, Whisper White.
Stamps: So Happy For You, Cheers to You.
Ink: Versamark, Chocolate Chip ink pad, More Mustard marker.
Other: Circle punch, big shot machine, dimensionals.
Non Stampin' Up: Paper by Kaiser craft, Glitter and white embossing powder, clear embossing powder, heat tool, Ranger Perfect Medium Pens, Cuttlebug diamond plate embossing folder, Coke Zero can.

Tips and Tricks:
1. To get the metal how you want it:

• Do be very careful! Jagged or not, this metal can cut you easily.
• Wash out your aluminium can. With sharp scissors, cut off the top and bottom of the can, then cut the cylinder up one side so you end up with a long rectangular piece.
• Dry off any water with a tea towel and cut a piece to fit inside your diamond plate embossing folder. Run it through the big shot machine.
• Trim the metal to the size and shape you want. I couldn't cut it straight with my scissors so I ended up using a circle punch to make the round discs. The punch cut the metal quickly and efficiently.
• I used double sided tape to secure the discs.

2. To heat emboss the beer mugs I first inked the stamp with Versamark then inked the stamp with Chocolate Chip ink before stamping on Whisper White card. Next I used clear embossing powder and the heat tool. After that I used a Perfect Pearls Medium pen (a Versamarker would be great too) to colour the beer foam and then used the white/glitter embossing powder to make the foam pop and shine. I used a More Mustard marker to colour in the beer mug.
3. The same beer mug is stamped in Versamark on the grey card to give interest to the background.

Stuff Ups:
1. I originally used a cactus stamp and green ink for the background but it looked terrible. The beer mug image works so much better.
2. As I said before, I couldn't cut the metal straight so I used the circle punch in desperation and it worked.

Tropical Birthday

Here's a card I made for my nephew's girlfriend. I wish I could lay claim to the design but I can't. I cased this from Stampin Funn with Cheryl. I love it so much I barely changed a thing. I embossed the background palm fronds and I coloured in the straw and umbrella, that's it.

Rating: Delightful



Materials:

Cardstock: Whisper White, Island Oasis DSP and what I thought was So Saffron but it's not. It must be some old cardstock from my subtles collection.

Inks: Chocolate Chip, Old Olive, Rose Red, Tempting Turquoise marker, Pumpkin Pie marker, So Saffron marker, Versamark.

Stamps: Tropical Party.

Other: Sponge, scallop oval punch, oval punch, dimensionals, whisper white satin ribbon, clear embossing powder, heat tool.

Non SU: Wendy Irving Collections: Expressions Clear Cling Stamps -  'Occasions'.

Tips and Tricks:

1. I used markers for the flowers so I could use multiple colours at once.

2. I coloured in the straw and umbrella after stamping with chocolate chip ink.

3. The whisper white is sponged around the edges with old olive ink.

4. The orange polka dot paper is from the Island Oasis DSP pack.

Stuff Ups:

Surprisingly none! The only thing that bugs me is that the happy birthday isn't capitalised.