Cricket Card

I've been needing ideas for manly cards and luckily I had this stamp set. This card was inspired by a card in an old Stampin Up catalogue and since cricket season is here again, I thought it would be the perfect time to make it.

The green cap features special Gel-a-tins Jelly scented embossing powder in 'Pine Fresh' so it smells like a pine forest. The fragrance is supposed to last for three weeks. You can check out Gel-a-tins here and their blog is here.

Materials:
Cardstock: Chocolate Chip, Old Olive, Cherry Cobbler, Very Vanilla.
Ink: Chocolate Chip, Cherry Cobbler, Versamark.
Stamps: Teeny Tiny Sentiments, Just Cricket.
Other: Modern label punch, Early Espresso striped grosgrain ribbon, dimensionals, mat pack, paper piercer.
Non Stampin' Up: Gel-a-tin's Jelly Scented embossing powder in Pine Fresh, Bo Bunny Cambridge icandy brads.

Tips and Tricks:
1. This card is really straight forward. As I said, the cap is embossed with green pine scented embossing powder.
2. The grass is cut with my paper snips.
3. The cricket ball is on a dimensional as is the sentiment.

Stuff Ups:
1. The brad placement. I even used my paper piercing guide and still didn't get it right.
2. The ribbon looks a little bit loose and wonky on the right hand side but it seemed fine in real life.
3. Maybe I should have lightly coloured the cricket bat.

Pleasant Surprises:
1. My layering proportions are getting much more accurate.
2. I'm pleased with the way the grass turned out.

Sew Nice to Stamp!

I've broken in another new stamp set - Sew Suite. This card was made for my Grandma, it's her birthday today and I'm visiting her tomorrow. I did want to make a bright, happy card and I think this fits the bill. It's a Kate original:

I've used quite a lot of things to create this card. It's one of the fussiest cards I've ever done.

Materials:

Cardstock: Melon Mambo, Yoyo Yellow (retired), Whisper White, Island Oasis DSP, watercolour paper.

Ink: Versamark, Stazon black, Pacific Point, Melon Mambo, Pumpkin Pie, Crumb Cake, Daffodil Delight, Sahara Sand marker.

Stamps: Sew Suite, Teeny Tiny Sentiments.

Other: Big Shot machine, Vintage Wallpaper embossing folder, heat tool, dimensionals, sponge, White Uniball gel pen, Ice Cream Parlor ribbon (American spelling), Ice Cream Parlor buttons, mini glue dots, aqua painter.

Non Stampin' Up: Clear embossing powder, non stick craft sheet.

Tips and Tricks:

1. For the sewing machine and cotton reels, I stamped them on the Versamark ink pad, then in Stazon Black, then onto the watercolour paper. I added clear embossing powder and heat embossed the images.

2. I used my Stampin spots to dab ink onto the craft sheet and used that ink for the water colouring.

3. The buttons are threaded with pieces of Whisper White cardstock and adhered with mini glue dots. The glue dots also keep the paper threads in place.

Stuff Ups:
1. The faux stitching around the outside. I practised on scrap cardstock first and it looked acceptable but when I started to do it on the card, it all got messed up. The cardstock was too light and my lighting was too bad to see what I was doing properly. I have learnt that it works best on darker cardstock (as it did in my practise session) and with smaller stitches. I need to learn how to 'corner' properly. I need to make the stitches consistently the same size and in a straight line. I feel I almost wrecked the card with the stitching I did at the end.
2. I used a Sahara Sand marker to trace around the sewing machine to cover up some leaked ink from my water colouring, but I wish I had just left it plain.
3. I forgot to position the buttons tag lower (I nearly forgot to use it completely!) which meant the sentiment didn't fit. As a result I had to cut it out from its nice modern label punched tag. I sponged around it and jammed it in the corner. I think it's ok but not what I had planned to do.
4. Maybe placing three buttons under the ribbon as well as on top would better balance out the card? I'm not sure. I don't want the buttons to dominate the whole card.
5. My cutting out could be better. At the very least, I could try a technique that I've seen on YouTube - after cutting out the images, run around the cut edge with the side of a black marker tip so you don't see the white core.
6. I think I can see a dimensional poking out from under a cotton reel.

I know I sound quite critical but I really am pleased with this card, apart from the faux stitching that is.

A Venture in Layering

I've been wanted to try a few new techniques lately and I'm always looking for the opportunity to use them. For this card I wanted to try a bit of layering. Not sure what the official term is, but I'm using layering to describe the building of ink, stamps and/or embossing on cardstock. This first attempt turned out to be a bit light handed but I'm happy with what I have done none the less.

I did break out my brand new and desperate to try product - scented embossing powder! I bought it (and many others) from gel-a-tins. It smells just like a vanilla latte. Apparently the scent will last for 3 weeks. The colour is white with brown specks. You can't really see it in the photo, I probably should have used a darker embossing powder (such as Chocolate Bliss or Can't Catch Me Gingerbread).

Grandad's birthday - hope he enjoyed it and liked my card. Here's the recipe:

Materials:
Cardstock: Chocolate Chip, Very Vanilla, Newsprint DSP.
Ink: Chocolate Chip, Versamark.
Stamps: Bliss, Teeny Tiny Sentiments, Wonderful Favourite.
Other: Early Espresso striped grosgrain ribbon, oval punch, scallop oval punch, dimensionals.
Non Stampin' Up: Perfect Pearls mist in Heirloom Gold, Gelly powder - Extra Foam Vanilla Latte scented embossing powder from gel-a-tins. (The website is a little bit buggy at the moment but I'm sure it will be fixed soon.)

Tips and Tricks:
1. The layering - I've seen a lot of cards out there with a lot going on with the DSP - inking, embossing, distressing, etc, so I had a go at it myself:

• First I misted my DSP with water and then crinkled and screwed it up.
• Next I sprayed it with Perfect Pearls mist in Heirloom Gold and let it dry.
• Then I stamped an image from the Bliss stamp set in Versamark and applied the scented embossing powder. I heat embossed it.
• After that I stamped the bird from Bliss in Chocolate Chip ink randomly over the DSP.

2.  I stamped another bird in Chocolate Chip on Very Vanilla cardstock, cut it out and popped it up on dimensionals in the bottom right hand corner.

Stuff Ups:
1. As I've said already, I should have chosen a darker embossing powder - I was too cautious.
2. Same with the Perfect Pearls mist - I should have used more.
3. The sentiments aren't aligned properly. They are three separate stamps and you can tell. The happy birthday one is also too high and nearly cut off by the punch.

Clean and Simple Birthday

I wanted to make a clean and simple birthday card for my friend Nean so I set myself a 20 minute challenge! This is the result:

The green does look much better in real life (like most cards do) and is textured which hasn't been picked up too well by the camera. That's probably my fault, not the camera's.

Materials:
Cardstock: Crumb Cake, Kiwi Kiss textured, Island Oasis DSP, Tempting Turquoise, Very Vanilla.
Ink: Tempting Turquoise.
Stamps: Teeny Tiny Sentiments.
Other: Big Shot machine, Top Note die, Victorian lace, Beautiful Wings embosslit, Basic Pearls, Modern label punch, dimensionals, mini glue dots.
Non Stampin' Up: None.

Tips and Tricks:
1. There are none really, this card is as easy as they get. I suppose I'll tell you that I cut up the Basic Pearl Strips into segments of two or three pearls and used them as the butterflies bodies.
2. The butterflies are stuck on with mini glue dots.

Stuff Ups:
1. This card could certainly be jazzed up with a bit of time and effort but I'm pleased with it as is.
2. Probably should have used Old Olive instead of Kiwi Kiss but I really wanted to use textured cardstock and I don't have textured Old Olive.

Father's Day 2 Ways: Part 2

For this card I knew I wanted to play with two of my new Stampin' Up items - Elegant Soiree DSP and the 'To a Classic' stamp set. They may be retired now (since the new catalogue came out) but I still only just bought them. This card is a Kate original and here is the result:

There's a lot of colours mixed up here so I hope I've gotten away with it. I really wish I had the correct coloured cardstock but I didn't so I had to substitute for some retired cardstock.

Materials:
Cardstock: Elegant Soiree DSP, Chocolate Chip, Very Vanilla, Bashful Blue or Brocade Blue (sorry don't know which!)
Ink: Chocolate Chip ink pad, Chocolate Chip marker, Marina Mist marker.
Stamps: To a Classic, Teeny Tiny Sentiments.
Other: Early Espresso striped grosgrain ribbon (think it's retired now), scallop oval punch, oval punch, dimensionals, paper piercer, mat pack.
Non Stampin' Up: Brown/bronze brads, aqua painter.

Tips and Tricks:
1. The car and checkered pattern are the same stamp and in between them (on the stamp) is the sentiment 'happy birthday to a classic' (I think) which, of course, I didn't want on a Father's day card. I used markers to ink up the stamp.
2. I used Marina Mist ink and an aqua painter to lightly shade in the car.
3. I tried to make a 'dashboard dial' effect with the sentiment layers.
4. The car layer is popped up on dimensionals to accomodate the brads and ribbon underneath.

Stuff Ups:
1. The car image - I should have either clear embossed the image first or used watercolour paper because the ink started to bleed when I added the water via the aqua painter. After it dried I touched up the image with the marker which hid a multitude of sins!
2. I've run out of Baja Breeze cardstock - I had to substitute with old retired stuff instead.
3. I've run out of Early Espresso cardstock - I had to substitute it with Chocolate Chip instead.
3. Probably should have used four brads to balance out that top layer.
4. The ribbon should have been a bit tighter but wrapping it around paper was difficult due to its flimsiness.

Pleasant Surprises - Ooh, a new heading!
1. I managed to align the 'Happy Father's day' and 'dad' stamped images the first time I stamped them!

Patchwork Birthday

I've seen this patchwork technique quite a bit on the different blogs that I visit and couldn't resist giving it a try. I learnt a lot for the next time that I attempt it!

This is a similar design to the one in 'Double but Different Part 2'. I made this for another niece's birthday. Normally with my cards I make a single layer insert to write on, particularly if the base cardstock is a dark colour. For this card I made a double layer insert using the same DSP as I have used on the front of the card. Here's a photo:

I'm pleased with the way the insert turned out. It ties it all together nicely.

(This is a very strange coincidence and it's times like these I can't help but know there's got to be a higher power watching over us all - I couldn't remember if the brad I used was called antique or vintage so I went to check in my bag where I keep the brads. I flipped on the light and saw a big spider just about to crawl inside the bag I needed to check. If I had been a moment later I wouldn't have seen the spider - just rustled around in the bag and possibly would have been bitten!! So there you go. Also, old spidey is no longer with us. I made sure of that.)

Materials:
Cardstock: Rich Razzleberry, Very Vanilla (as the base to stick the squares on), Cottage garden DSP (retired I think).
Ink: Old Olive, Rich Razzleberry.
Stamps: Teeny Tiny Sentiments.
Other: Top Note die, Big Shot machine, Vintage Wallpaper embossing folder, Square punch, Chantilly lace, Antique brads, sponge, dimensionals, Modern label punch, paper piercing tool, mat pack, basic pearls.
Non Stampin' Up: Perfect Pearl Mist in Heirloom Gold.

Tips and Tricks:
1. The patchwork -

• I cut a piece of scrap Very Vanilla cardstock the same size as my card. I should have used PLAIN paper!! If you have a go, please try plain paper first.
• I ran my glue tape in close together lines across the scrap of card.
• I used my new square punch to punch out the squares from different sheets of the Cottage Wall DSP and stuck them carefully onto the glue tape.
• When finished I ran it through the big shot using the top note die.
• I ran the patchwork die cut through the big shot again in the Vintage Wallpaper embossing folder.
• I sponged around the outside of the die cut with Old Olive ink. Yeah it's a bit too dark - I got carried away.

2. The base card is sprayed with the Heirloom Gold mist.
3. I cut a strip of DSP and glued it onto the base card to break up the razzleberry.
4. I punched out two modern labels and cut one in half, spaced it out and glued it behind the other to give that extra bit of border. I sponged around it with Old Olive.

5. The lace -

• I cut a piece and glued the ends behind the top note die cut.
• I cut two shorter pieces, twisted them once and thread them underneath the glued on piece.
• Then I stabbed a hole through them and the cardstock with my paper piercing tool.
• The antique brad was pushed through and secured.

6. I added the smallest basic pearls to the modern label punch out to give it a lift. I added them after I took the photo, so sorry you can't see them.

Stuff Ups:
1.  The Very Vanilla cardstock made my patchwork a little bit too thick for the embossing folder so some of the embossed bits split a little. Plain paper would prevent this problem I'm sure.
2. I used too much ink around the top note die cut.
3. Trying to get the brad through all the lace and cardstock was a challenge. It ended up quite bulky so I popped the die cut up on dimensionals to compensate.
4. If I'm being picky, I would only use one type of striped paper and more of it as the two pieces I used don't totally work. At the very least I would try to punch the stripes at the same angle.

Double But Different Part 1

I've just made two birthday cards for my husband's twin nieces birthday (they're grown up not kids) and since the two of them are so different, I've made very different cards. This is the card I made first for Jess.

Materials:
Cardstock: Early Espresso, Very Vanilla, Specialty DSP (retired I guess, it was in the summer mini catalogue).
Ink: Early Espresso, Baja Breeze.
Stamps: Butterfly Prints, Teeny Tiny Sentiments.
Other: Sponge, Modern label punch, Basic Pearls, Victoria lace (also from the summer mini), dimensionals, mini glue dots, Butterfly punch.
Non Stampin' Up: Nothing, woohoo!

Tips and Tricks:
1. I used caution when sponging the specialty DSP which means use ink sparingly. I lightly inked my piece of sponge then dabbed it onto scrap paper a few times before using it. I started at the edges and in circular motions I applied and buffed the ink onto the paper. It took a while to do. When finished, I used a clean sponge to buff over the whole image which removed any excess ink from the embossing and made it pop!
2. I adhered the butterflies with mini glue dots.
3. The sentiment label is sponged in Early expresso around the edges and lightly sponged on the face with Baja Breeze. I did this to dull the brightness of the bare Very Vanilla cardstock. It's popped up on dimensionals so it doesn't interfere with the lace.
4. I used all 3 sizes of basic pearls on the sentiment punch, starting on the outside with the largest. I cut a pearl strip into smaller segments of 2 for the butterflies bodies.

Stuff Ups:
1. I wasn't carefully enough in measuring my DSP so I had to trim it after the sponging and lost some of the great edge effect I got from the sponging process. I responged the cut edge but it's not quite the same.
2. The 'happy birthday' sentiment is a little off centre but I can live with it.

Mother's Day

I simply adore this Mother's Day card, however, I cannot lay claim to the gorgeous design. This design is by the incredibly talented Angie Brown from Stampin' Dreams. I loved it from the second I saw it and knew it would be perfect for my Mum for Mother's Day. It also has a lot of elements to it and not a lot of stamping.

The main differences between my card and Angie's are that I didn't have the same sentiment stamp as Angie so I lowered the placement of the bird and branches, and popped my sentiment up on the modern label punch out (my fave!). Also my white embossing powder was clumpy so I chucked it out (it was useless) and as a result I don't have that pretty detail on the bird's wing. I used plain old Versamark instead.

Here's the procedure:

Materials:
Cardstock: Shimmery White, Bashful Blue, Night of Navy. You could use Whisper White but the Shimmery White is much thicker cardstock and I feel it makes for a sturdier base card.
Inks: Bashful Blue ink spot, Night of Navy ink spot, Versamark.
Stamps: Vintage Vogue, Teeny Tiny Sentiments.
Other: Big shot machine, Top note die, Whisper White satin ribbon, Modern Label Punch, Bird punch, sponge, stick on pearls, retired triple flower punch, dimensionals, 2 way glue pen.
Non Stampin' Up: Polka dots embossing folder by Cuttlebug, black permanent marker.

Tips and tricks:
1. I sponged around the edges of the top note die cut, bird body and modern label punch out piece using Bashful Blue ink.
2. I punched 7 branches out of Night of Navy cardstock using the bird punch. I trimmed them to fit the way I wanted and glued them down with the 2 way glue pen.
3. I coloured a basic pearl with black permanent marker to create the bird's eye.
4. I've mentioned it before, the satin ribbon frays as soon as you look at it so handle it as little as possible.
5. I used Night of Navy ink to stamp the sentiment. I didn't think Bashful Blue was powerful enough.

Stuff Ups:
1. As I said, I was planning to emboss the stamping on the bird's wing in white and then sponge over it with Bashful Blue but my embossing powder was clumpy and no good. It wouldn't stick properly to the Versamark.
2. The Polka dot embossing folder was a little too small for the layer size that I wanted so one end is a little bit sparse with dots.
3. My SNAIL adhesive is really hard to use. It just doesn't want to turn and it is starting to dent my cardstock. It's very disappointing. I also left my back up double sided tape at work so I had to use my precious mini glue dots on the back of the polka dot embossed layer. Using tape rollers can flatten your embossing so it's always best to use peel-the-backing-off it tape (known as Sticky Strip in the Stampin' Up world).
4. My layers are always skewiff, never proportional.