It's the last one of these I promise!

I have to stop making these stripey male cards, I promise this is the last. I will admit I was short on time (busy with work stuff) and this has been my go to design for the last few months so it's time for a change.

Here's the card:

This card was made for a friend's birthday.

Materials:
Cardstock: Always Artichoke, Basic Black, Close to Cocoa (retired), not sure what colour the orange is called - maybe Peach Parfait? Printed acetate (My Memories), Rough and Tough: Awesome (Kaisercraft).
Ink: Stazon black, Versamark.
Stamps: Best Dad Ever, French Foliage (Stampin' Up).
Accessories: Cappucino baker's twine (The Twinery), hemp twine (Stampin' Up), star charm (My Mind's Eye Stella and Rose - Hattie "Happy" Bits and Pieces).
Tools: Paper trimmer (Fiskar's), mini glue dots, glue tape (Stampin' Up), scoring board (Martha Stewart).

Tips and Tricks:
1. It's all pretty simple - cut and trim stripe layers to fit.
2. Layer the acetate on the cardstock with mini glue dots.
3. The charm was quite heavy so I anchored it to the card with a glue dot so it doesn't pull the twine down too much.

Stuff Ups:
1. The third layer (acetate on black) was cut slightly crooked which I didn't notice until I stuck it down. You can't really tell in the photo (yay) but it bugs me.
2. I don't know if I like the cappucino baker's twine on the card or not. It's a bit too much.

Pleasant Surprises:
1. Only having to stamp on the acetate once!

Another twist on an old success

I made this card yesterday and based it on this card that I made back in October. I played with stripes and colours and I'm pleased with the effect.
Here it is:

Again it's a simple card. I'd spent most of the morning making a baby card just like this one which took longer than expected thus cutting back on the time I had to make this card.

Materials:
Cardstock: Island Indigo, Pool Party, Basic Black, printed acetate by My Memories, P187 Spring Greens: Cabbage Patch by Kaisercraft.
Ink: Stazon Black.
Stamps: Best Dad Ever (for the happy birthday sentiment).
Other: Mini glue dots, baker's twine in Caribbean and Cappuccino by The Twinery.

Tips and Tricks:
1. The sentiment is stamped on the acetate and left to dry before using.
2. All the acetate layers are affixed with mini glue dots.

Stuff Ups:
1. I had to redo the sentiment on the acetate so I removed the ink with Stazon cleaner and tried again.
2. In this picture the cappuccino twine is twisted over itself but I straightened it out before I posted the card.

Pleasant Surprises:
I managed to get the light right for once so the colours in the picture ring true. I also found my mini easel which made it easier for me to get a better photo of the card.

Birthday time

I made this card this morning, it was a quick card to make and features washi tape which is something new that I bought and was looking forward to using.

As you can see, this card is customised for my brother-in-law. I have a new alphabet stamp set by Lawn Fawn that allows me to do this!

Materials:
Cardstock: Island Indigo, Basic Black, Brushed Silver, Whisper White.
 Ink: Tuxedo Black by Memento.
Stamps: Motorcycle by Stampin' Up, Jessie's ABC's by Lawn Fawn.
Other: Black and white checkered washi tape, sponge, dimensionals.

Tips and Tricks:
1. I put a little bit of glue tape down on the base card and stuck the silver panel to that. Then I put the washi tape around the edge to stick down the silver panel.
2. I sponged around the Whisper White layer to give it some interest.

Stuff Ups:
1. I should have cut the washi tape to make it thinner - it's just too overpowering.
2. Cutting the washi tape would also have allowed me to centre the motorcycle panel on the silver rather than have it sticking out over the top of the washi tape.
3. I really wanted to use my diamond plate embossing folder on the silver but it would have been too much.
4. The uneven edges on the washi tape was deliberate!

Pleasant Surprises:
I'm amazed that the letters of the sentiment all lined up - each letter is an individual stamp. Lawn Fawn stamps are brilliant at making stamping easy!

Christmas, oh how I love you!

What a month I've had! I did get my preparation done in time for my interview and it certainly paid off as I got the job! I'll be teaching at a brand new school next year that is still being built! It's so exciting! Yay!

I also finished all my Christmas cards yesterday, thank goodness. It's taken me 3 months on and off to get them done. I tried paper piecing and I'm pleased with the results. The colours pop more in real life, I just couldn't get a decent snap of the card today, sigh.

I made 50 plus some spares. I used different patterned paper (as I've posted in a previous entry) so each card is different from the next one.

Materials:
Cardstock: Crumb Cake, Old Olive, Cherry Cobbler, Very Vanilla, patterned paper is called December 25th by Kaisercraft.
Ink: Old Olive, Cherry Cobbler, Crumb Cake, Daffodil Delight, Memento ink in Tuxedo Black, Basic Black marker.
Stamps: Ornate Ornaments by Lawn Fawn.
Other: Basic Rhinestones, sponge.

Tips and Tricks:
1. Since I was making so many cards I did it all in stages like an assembly line:

1. Made a prototype.
2. Paper pieced the ornaments.
3. Cut the base cards and card layers.
4. Sponged the edges of the Very Vanilla with Crumb Cake ink.
5. Stamped images on the Very Vanilla.
6. Attached paper pieced ornaments.
7. Stamped sentiments on base cards.
8. Wrote messages in all the cards.
9. Attached layers to card fronts and added rhinestones.
10. Addressed envelopes and now they are ready to post!

2. Paper piecing took a long time! I stamped the baubles on patterned paper and cut them out. I stamped the baubles again on patterned paper and cut out the bands and topper pieces. Then I ran the edge of a Basic Black marker around the edge of each paper piece to hide the cut edge.
3.  I use my scissors to help me attach the sticky back rhinestones accurately. I find it easier than using tweezers.

Stuff Ups:
1. Lots. When making so many cards, mistakes are easy to make. The most mistakes were to do with stamping, the image smudging or not stamping fully, etc, etc.

Father's Day 2 ways: Part 1

Yes, it's been a while! Had a card drought for the last month - no birthdays or anything. I have two for you today - one I made for my Dad and one I made for my father-in-law. I'll start with the one for my Dad.

You can just see a pic of me on the left behind the card - hello me!
I was cruising google images for inspiration and came across a card I adored and have cased it almost entirely I'm sorry to say. It features three Stampin' Up products that I received yesterday (To a Classic stamp set, Newsprint DSP and silver brushed metallic cardstock, oh and the motorcycle stamp that I haven't used yet) so I had to try it. The original card I loved was made by Ros Davidson.

Materials:
Cardstock: Basic Black, Brushed Silver, Very Vanilla, Newsprint DSP.
Ink: Stazon Black, Basic Black.
Stamps: Motorcycle, To a Classic, Teeny Tiny Sentiments.
Other: Sponge, dimensionals, big shot machine.
Non Stampin' Up: Diamond Plate embossing folder by Universal, Black and white checkered Japanese washi tape (inside the card), Stampamajig.

Tips and Tricks:
1. Using the brushed silver cardstock was a lot easier than using a coke can to achieve the metallic effect. Another idea is to wrap a piece of cardstock with tin foil and run that through the big shot machine. The cardstock should give the tin foil the power to hold the embossed image. Haven't tried it myself just yet, only read about it somewhere.
2. I used the stampamajig to stamp the sentiments. I find that the easiest way to stamp with small skinny stamps. I don't bother using the plastic sheet, just that little T-square device. It helps to avoid wobble marks and smudging you make especially if you are prone to it like I am.
3. I sponged around the main image with a watered down Basic Black ink solution. My Basic Black ink spot pad has dried out and I don't have a reinker so I just added a bit of water (and probably wrecked it now) and used that with a sponge.
4. Ways my card differs from the original:

• I am not talented enough to create a masked and stamped image so mine is a single stamped motorbike.
• My proportions and dimensions are different (and probably skewiff).
• I have a sentiment stamped on mine.
• I used a diamond plate embossing folder rather than the square lattice embossing folder.
• So yeah, not a whole heap different...

Stuff Ups: 
1. The Very Vanilla layer - I should have trimmed it down but I was too worried that I'd ruin it so I left it big.
2. Getting that Very Vanilla layer on straight. I must have peeled it off 3 or 4 times. Thank goodness the card didn't bend.
3. Forgot to take a photo of the insert inside. It looks really cool with the black and white checkered washi tape along the bottom - like a checkered flag at the races.

A bright birthday

The best thing happened today. I dropped into my favourite stamping store (Stampit in East Vic Park) and they had a sale on Prima and Ki Creations - 50% off it all! I was like a kid in a candy shop and stocked up on all the Prima Flowers and Pebbles that I wanted. You can be sure to see a lot more of those in the future, starting today!

I made a card for my Mum's birthday but I wasn't completely happy with the way it turned out. I had to look to the internet for inspiration as I was suffering from brain burnout. I'll post the card I designed at a later date, but for now here is the card I was inspired to make:

No top note die or modern label punch, aren't you proud of me??
The colours are much bright in real life but that's what bad lighting and bad photography will do.
The card that inspired me to make this is from Ivanka's Card Studio.

Materials:
Cardstock: Basic Black, So Saffron, Melon Mambo, Crumb Cake and Shimmery White.
Ink: Stazon Black.
Stamps: Curly Cute.
Other: Big shot machine, Vintage wallpaper embossing folder, dimensionals, mini glue dots.
Non Stampin' Up: Flowers (Prima Flowers - Raspberry), Blue rhinestones (BoBunny Jewels - Barefoot & Bliss).

Tips and Tricks:
1. This card is pretty straight forward - simple layers and the shimmery white card is dry embossed with the vintage wallpaper embossing folder.
2. The flowers are adhered to the card with mini glue dots.
3. The sentiment is popped up on dimensionals.

Stuff Ups:
1. The sentiment took me ages today because I couldn't stamp it perfectly so I kept redoing it, then I'd get it right but cut it crooked and have to start over. Sooo frustrating!
2. I tried using basic black ink but it kept bleeding through the cardstock. Stazon gives a much crisper result, however, it does stain your stamp.
3. I need to buy new blades for my paper trimmer so the layers are a bit straggly around the edges.

Hubby's Birthday

Well it's two male birthday cards in a row! It's my husband's birthday in two days time and we will be in Bali celebrating it! This is hot off the press, just finished. I'm giving Jason his presents tomorrow so I don't have to take them on the plane. This is a pure Kate creation:

I'm thrilled with the result because it was looking decidedly dodgy for a while. It all came together in the end.

Materials:
Cardstock: Basic Black, Basic Grey, Going Grey, Whisper White.
Stamps: So Happy For You, Cheers to You.
Ink: Versamark, Chocolate Chip ink pad, More Mustard marker.
Other: Circle punch, big shot machine, dimensionals.
Non Stampin' Up: Paper by Kaiser craft, Glitter and white embossing powder, clear embossing powder, heat tool, Ranger Perfect Medium Pens, Cuttlebug diamond plate embossing folder, Coke Zero can.

Tips and Tricks:
1. To get the metal how you want it:

• Do be very careful! Jagged or not, this metal can cut you easily.
• Wash out your aluminium can. With sharp scissors, cut off the top and bottom of the can, then cut the cylinder up one side so you end up with a long rectangular piece.
• Dry off any water with a tea towel and cut a piece to fit inside your diamond plate embossing folder. Run it through the big shot machine.
• Trim the metal to the size and shape you want. I couldn't cut it straight with my scissors so I ended up using a circle punch to make the round discs. The punch cut the metal quickly and efficiently.
• I used double sided tape to secure the discs.

2. To heat emboss the beer mugs I first inked the stamp with Versamark then inked the stamp with Chocolate Chip ink before stamping on Whisper White card. Next I used clear embossing powder and the heat tool. After that I used a Perfect Pearls Medium pen (a Versamarker would be great too) to colour the beer foam and then used the white/glitter embossing powder to make the foam pop and shine. I used a More Mustard marker to colour in the beer mug.
3. The same beer mug is stamped in Versamark on the grey card to give interest to the background.

Stuff Ups:
1. I originally used a cactus stamp and green ink for the background but it looked terrible. The beer mug image works so much better.
2. As I said before, I couldn't cut the metal straight so I used the circle punch in desperation and it worked.

Finally, the Valentine's Card

This is the card that I've made for my husband for Valentine's day. I didn't look to other cards for design ideas or colours, I just chose the colours and played with design ideas until I found what made me happy.

Materials:
Cardstock: Basic Black, Real Red and Very Vanilla.
Inks: Basic Black marker, Real Red marker, Real Red ink pad, Versamark.
Stamps: Wonderful Favourite, A Happy Heart.
Other: Black embossing powder, heat tool, big shot machine, sponge, oval punch, dimensionals, paper piercer and mat pack.
Non Stampin' Up: Polka dot embossing folder, red heart brads.
Tips and Tricks:
1. It may be hard to tell, but the base card is black.
2. I used markers to colour the hearts and crosses stamp. Originally I also used Glossy Accents on the red part of the stamp, but it made the ink run within the gloss and I lost the definition.
3. The 'to my' and 'husband' ovals are sponged around the edges with Real Red ink.
4. The words 'to my wonderful husband' are embossed in black.
5. I used the paper piercer guide that comes with the mat pack to position the heart brads and get them evenly spaced.
6. I have made an insert on Very Vanilla with a red heart brad and another stamp on it from the A Happy Heart stamp set. It will be easier to write on that than black.

Stuff Ups:
1. The Glossy Accents that I've mentioned at least twice already!
2. There is the tiniest of smudges on the hearts and crosses stamped image.
3. The embossed words are a little bit uneven in places.
4. The sponging - I'm not 100% happy with it and I'm not sure why.