3rd Anniversary

Happy 3rd anniversary to my gorgeous hubby! This is the card I made for him. It's very cutesy but he likes it anyway. The muffins were inspired by this card by Chari Moss.

Here's how I made it:

Materials:
Cardstock: Confetti White, Crumb Cake, old blue that was lying around.
Ink: Tuxedo Black (Memento), Crumb Cake, markers - Crumb Cake, Bashful Blue, Pink Pirouette, Pretty in Pink, Real Red, Basic Black.
Stamps: Love n Breakfast, Sopie's Sentiments (both Lawn Fawn).
Accessories: Hemp twine, Bevelled Window Panes, blue organza ribbon (Kaiser Craft), Basic Rhinestones.
Tools: Big Shot machine, polka dot embossing folder, sponge, mini glue dots, dimensionsals.

Tips and Tricks:
1. It's pretty straight forward - the embossed white layer was sponged with Crumb Cake ink around the edges.
2. I adhered the bevelled window pane with mini glue dots because I couldn't think of a better way to keep it in place. If you know a better way, please let me know in the comments. Thanks!
3. Those spots either side of the sentiment are rhinestones.

Stuff Ups:
1. The muffins are a little big to fit under the window pane properly.
2. The confetti cardstock is gorgeous - full of little bits so it looks recycled. Unfortunately one of those bits looks like a red splotch above the sentiment, oh well.
3. The glue dots show through the window pane.
4. Probably should have positioned the centre panel lower and cut the ribbon shorter.

Pleasant Surprises:
1. I like the blue cardstock. It was a bit flimsy but the colour is pretty.
2. The muffins are cute and my colouring in was not atrocious.

A little boy's birthday

It's been a while since I posted a 'Kate Original' card. (Obviously meaning I didn't copy or case it from anyone, it's my own creation, just a product of my crazy thoughts.) Here's one for you today! I made this card for a friend's son who turned 3 today.

Here's how it's made:

Materials:
Cardstock: Real Red, Tempting Turquoise, Whisper White.
Ink: Tempting Turquoise, Versamark, Tuxedo Black (Memento). Markers: Wild Wasabi, Soft Suede, Pumpkin Pie, So Saffron, Real Red, Tempting Turquoise, Bashful Blue, Pink Pirouette, Basic Black.
Stamps: Monster Fun (Hero Arts. I borrowed this from a friend at our card making day - thanks Shauna!), Put on Your Party Hat (Fiskars), Admit One (Lawn Fawn).
Accessories: Maraschino and Cappucino baker's twine (The Twinery), Miss Nelly jewels (Kaisercraft).
Tools: Big shot machine, Top Note die, sponge, dimensionals, 2 way glue pen, glue tape, mini glue dots, sanding block.

Tips and Tricks:
1. The blue layer was stamped randonly with a Lawn Fawn star in Versamark. I sponged around the edges with Tempting Turquoise ink.
2. I trimmed up the white top note die cut to reveal the red one beneath. Then I sanded the edges of the white (I would have used my distressing tool had I brought it with me) and sponged around it with Tempting Turquoise ink.
3. The monsters and balloons were coloured in with Stampin' Up markers. After cutting out all the monsters and balloons, I used a black marker to colour the cut edges.
4. The balloons were adhered to each other one at a time so I got the right positioning on the card. Then I attached the twine to each balloon using glue tape. After that I attached the balloons to the card with dimensionals.
5. I tied up the balloon strings and stuck them in position with a mini glue dot.
6. The mini monster is on dimensionals too to make him stand out and look like he's holding the bunch of balloons.

Stuff Ups:
1. This is just a technicality but I don't like the streakiness of the markers. There's nothing I can do about that apart from buy Copics instead.
2. The cutting out the top note die cut could have been better (as always).

Pleasant Surprises:
1. The way the red and blue contrast. I like it.
2. The stamp set is so cute. I would have been lost without it!
3. Finally, a concept I had in my head was realised in the way I wanted it to be!!

Happy St Patrick's Day

It's not often that I make a card that I don't intend to give away but here's one. I want to keep this one for my own collection. It's not my design - I found the design at Card Scraps. I thought it was so simple yet cute!

Here's my very slightly modified, not nearly as good version:

Happy St Patrick's to you all! Have a great day!

Materials:
Cardstock: Garden Green, Crumb Cake, Whisper White.
Ink: Garden Green.
Stamps: So Happy For You, Teeny Tiny Sentiments.
Accessories: Green organza ribbon (Kaiser Craft).
Tools: Big shot machine, Top Note die, Lattice embossing folder, scissors, bone folder, tape runner, scallop oval punch, oval punch, paper trimmer, dimensionals.

Tips and Tricks:
1. Stamp the four leaf clover on the Whisper White card then cut with the Top Note die.
2. Run the die cut through the Big Shot in the lattice embossing folder.
3. Trim the die cut along the perforation so it fits nicely on another Top Note die cut.
4. Glue it altogether. Easy!

Stuff Ups:
1. The stamped image isn't as solid as I would like. If I had time I might have coloured over them with a marker.
2. I still can't tie bows properly or straight.

Pleasant Surprises:
1. Just that I feel it's strikingly effective!
 

Playing with a new stamp set

I broke out another unused stamp set today - Simply Soft. It features pretty detailed flowers and has 2 step stamps (I didn't 2 step them today though). This design belongs to Lana Harvey from Lana's Stampin' Cottage. I loved her card so much I didn't change anything except to suit my own supplies.

I made two colour variations:

We'll call this card 1.

And this is card 2.

Materials:
Cardstock: Card 1 - Very Vanilla, Lovely Lilac (retired Stampin' Up colour). Card 2 - Whisper White, Island Indigo.
Ink: Lovely Lilac, Island Indigo, Stazon black, Old Olive marker.
Stamps: Simply Soft.
Accessories: Victoria crochet trim, Basic Pearls, Blue organza ribbon (Kaiser Craft).
Tools: Big shot machine, Vintage Wallpaper embossing folder, Top Note die, sponge, aquapainter, Beautiful Wings embosslit, mini glue dots.

Tips and Tricks:
1. I cut the top notes before stamping the images on.
2. I used an aquapainter to colour the flower heads and buds. I used an Old Olive marker for the stems and leaves.
3. The stamped top notes and Vintage Wallpaper layers are sponged with the feature colour (Lovely Lilac or Island Indigo).
4. I'm not good at tying bows so the ribbon is adhered in two parts. A length is cut and stretched across the front of the card. The ends are taped behind the card layer. Another length is used to tie a bow around the first part. Hey, it works for me!
5. Card 1 would look so much better with matching ribbon but I didn't have any.

Stuff Ups:
1. I would have used the 2 step stamps but forgot to use my stamp-a-ma-jig on the outline stamp. It was fun to aquapaint any way.
2. I would use Certainly Celery or another light green marker rather than Old Olive. I feel it is too dark for the look that I want.
3. The sponging is uneven but I can live with it.

Pleasant Surprises:
1. The overall look of the aquapainting is ok.
2. The way the organza ribbon matches the Island Indigo was a lucky surprise! It looks lighter than the cardstock in the photo but that's due to the nature of the ribbon versus the camera. In real life it matches perfectly.

New Stampin' Up colours

When I saw this card design I loved it for two reasons - 1. The colours it uses are the new In Colors for Stampin' Up, some of which I haven't used yet. 2. It features a stamp set that I have and hadn't used yet either.

So this card design is not mine, I found it while searching for some inspiration. It's made by Nancy Riley, click on her name to check out the card that she made. Here's my version of her card:

This is for my sister-in-law.

Materials:
Cardstock: Wisteria Wonder, Pool Party, Lucky Limeade, Whisper White.
Ink: Wisteria Wonder, Calypso Coral.
Stamps: Array of Sunshine (Stampin' Up) and Sophie's Sentiments (Lawn Fawn).
Accessories: (This used to be called 'other')  Basic pearls, ribbon (American Craft),
Tools: (This is a new section) Beautiful Wings embosslits, Circle punch, bird punch, scallop edge punch (Fiskars), Lattice embossing folder, 2 way glue pen, dimensionals, mini glue dots, scissors, double sided tape, big shot machine, Scoring board (Martha Stewart).

Tips and Tricks:
1. The branches and leaves were punched with the bird punch. I ran them through the big shot machine in the lattice embossing folder. I used a 2 way glue pen to adhere them to the card.
2. The coral flower was stamped 3 times and cut out. On two of the flowers, I've just cut out the inner sections and layered them with dimensionals.
3. The circles are glued on with a 2 way glue pen as I don't want the edges to lift up. A tape runner wouldn't get close enough the the circle's edge.
4. The butterflies are stuck on with mini glue dots.

Stuff Ups:
1. Originally I used a Vintage Wallpaper embossed piece of Wisteria Wonder instead of the circles but it was too busy for the look that I wanted.
2. When I finished the card, I had a sip from my can of Coke Zero and a drop of condensation landed on my card - oh no!! I got out my heat tool to dry it and it only let the faintest of watermarks. Silly me.
3. Looking at the card now, maybe I should have stuck the lowest branch over the ribbon instead of under it?

Pleasant Surprises:
1. I'm pleased with the overall look of the circles. I like that textured effect.
2. The ribbon matches the Pool Party butterflies nicely.
3. For once my cutting out was not too shabby!

Pink, Purple, White.

I will admit that this card was a struggle to create. While it is quite simplistic, getting the creativity together at 11:30pm on Christmas Eve, when I was bleary eyed with the need to sleep, was difficult. Still, it came together in the end.

That centre panel went through a miriad of different things before it ended up with a great whopping Prima flower as the centrepiece. I stamped two other panels before this one - the first was a rainbow tiered birthday cake with stars and streamers around it - but the colours didn't work. The second featured 2 step cupcakes but that wasn't working for me either. Even with this panel I played around with rhinestones before trying the piercing in the corners.

Materials:
Cardstock: Whisper White, Shimmery White, Wisteria Wonder, not sure which pink, Pink Passion maybe - sorry, it's old cardstock.
Ink: Chocolate Chip.
Stamps: Bake Me a Cake by Lawn Fawn.
Other: Big Shot machine, dots embossing folder, paper piercing tool, mat pack, dimensionals, Prima rose, clear button, Pink Sorbet baker's twine by The Twinery.

Tips and Tricks:
1. I used the guide in the mat pack to pierce the corners of the white cardstock.
2. Gluing down the flower was surprisingly difficult. 2-way glue didn't work, glue tape didn't work. I ended up using dimensionals and just hope that it has survived!

Stuff Ups:
1. The layers are not aligned properly - I was too tired to see straight.
2. I've spoken about the drama I faced with the stamping.
3. Getting the flower to stick.

Pleasant Surprises:
Just the fact that I finished a card at all and it's not totally hideous - it was looking that way for a while there!

The last of the brown (for now)

So I made this card for my friend Tracey whose birthday is today (Happy birthday Trace!) and my husband said it's nice but I've been using too much brown lately (yeah, brown has been my neutral colour of choice, mainly because I bought a whole pack of it). I thought this sounded like a challenge (in a warped kinda way) so I'm making cards without brown for a little while! This is the last of the brown for now:

The design of this card is from an old Stampin' Up catalogue. I've tweaked it to suit my whims.

Materials:
Cardstock: Chocolate Chip, Crumb Cake, Whisper White, Elegant Soiree DSP.
Ink: Versamark, Memento Tuxedo Black, Crumb Cake.
Stamps: Blissful Botanicals and Sophie's Sentiments by Lawn Fawn.
Other: Fiskars Eyelet border punch, Victoria crochet trim (I've called it lace in the past but it's not really called that), Perfect Pearls Mist in Heirloom Gold, American Craft ribbon, circle punch, Basic pearls, Big Shot machine, Beautiful Wings embosslit, mini glue dots, sponge, Fiskars corner rounder punch.

Tips and Tricks:
1. I lightly misted the Whisper White panel with the Perfect Pearls and let in dry before stamping on the sentiment.
2. I sponged around the butterflies with Crumb Cake ink.

Stuff Ups:
1. I messed up the alignment of the border punch so I had to do that again.

Pleasant Surprises:
1. I got the sentiment stamped correctly, first time! Gosh, I love Lawn Fawn stamps!!

For my new nephew

This card took me hours to make, mainly because I couldn't think of a design that I liked. I kept playing with layouts, different colour schemes and papers. None felt right. Eventually I came up with this card. I've made it for my niece who gave birth to a gorgeous baby boy on Friday! I am posting this card and a present to her tomorrow.

My card also qualifies to be part of a sketch challenge from Lily Pad Cards, yay! Here's the link to the challenge - Sketch Challenge.

Here's the sketch:

This is also the first baby card I've ever made. I broke out some new Lawn Fawn stamps for the occasion.

Materials:
Cardstock: Bashful Blue, Brushed Silver, Whisper White, watercolour paper.
Ink: Bashful Blue, Versamark, Basic Black, Stazon Black.
Stamps: 'Plus One' and 'Quinn's ABCs' by Lawn Fawn.
Other: Big shot machine, Top Note die, silver embossing powder, aqua painter, white organza ribbon, sponge, Circle cutter by Martha Stewart, mini glue dots, clear Bitty buttons.

Tips and Tricks:
1. I cut a top note die cut with my big shot machine. I stamped the rattle in Bashful Blue to make my own background. The top note die cut was adhered to the Brushed Silver layer. I trimmed the end offs of the die cut.
2. The pram and Charlie's name are stamped with Versamark on water colour paper and embossed with silver embossing powder. I used an aqua painter to colour them in. The wheels on the pram are water coloured with Basic Black ink which has taken on a purplish hue once it was watered down. Bitty buttons are adhered to the pram wheels with mini glue dots.
3. Charlie's name is layered on a piece of Bashful Blue cardstock which is adhered to the top note die cut. This covers up the top of the die cut and gives Charlie's name some dimension without using foam dots.
4. I sponged around the watercolour paper for Charlie's name and the pram with Bashful Blue ink which hasn't shown up in the photo.
5. I placed a mini glue dot behind the knot of the bow to help keep it flat and secure.
6. Lining up the stamps in Charlie's name and the sentiment took some time and tweaking. I tested the position of the stamps with ink on scrap paper until I was happy with the alignment.
7. I tested Memento's Tuxedo Black and Black Stazon on the silver cardstock and found that Stazon gave a blacker, more opaque black than Memento so I went with Stazon.

Stuff Ups:
1. I stamped and embossed Charlie's name many times in my quest to find a style I liked. I used different inks and colours, tried cutting out the letters, coloured the letters with markers, it all took a long time.
2. Some of the rattles didn't stamp properly so I filled in any missing parts with a Bashful Blue marker.
3. I have trouble using Martha's circle cutter so it took me a few attempts to get usable circles.
4. Being a teacher, the lack of capitalisation on the 'congrats' stamp and for Charlie's name does irritate me but I didn't make the stamps so I'll have to live with it. If Lawn Fawn made a Quinn's capitals stamp set, I'd buy it in half a heart beat. Maybe I should suggest it, lol!

Pleasant Surprises:
1. The whole card - didn't think it would look this good (if I do say so myself). My cards are usually pretty average and never look as good as all the other blogs out there. The acid test was my husband's reaction. Rather than, "Oh that's nice honey, very good!" (which I love hearing) I got, "Wow! That's awesome!" He sounded so surprised! I'm so proud of this card!

Sew Nice to Stamp!

I've broken in another new stamp set - Sew Suite. This card was made for my Grandma, it's her birthday today and I'm visiting her tomorrow. I did want to make a bright, happy card and I think this fits the bill. It's a Kate original:

I've used quite a lot of things to create this card. It's one of the fussiest cards I've ever done.

Materials:

Cardstock: Melon Mambo, Yoyo Yellow (retired), Whisper White, Island Oasis DSP, watercolour paper.

Ink: Versamark, Stazon black, Pacific Point, Melon Mambo, Pumpkin Pie, Crumb Cake, Daffodil Delight, Sahara Sand marker.

Stamps: Sew Suite, Teeny Tiny Sentiments.

Other: Big Shot machine, Vintage Wallpaper embossing folder, heat tool, dimensionals, sponge, White Uniball gel pen, Ice Cream Parlor ribbon (American spelling), Ice Cream Parlor buttons, mini glue dots, aqua painter.

Non Stampin' Up: Clear embossing powder, non stick craft sheet.

Tips and Tricks:

1. For the sewing machine and cotton reels, I stamped them on the Versamark ink pad, then in Stazon Black, then onto the watercolour paper. I added clear embossing powder and heat embossed the images.

2. I used my Stampin spots to dab ink onto the craft sheet and used that ink for the water colouring.

3. The buttons are threaded with pieces of Whisper White cardstock and adhered with mini glue dots. The glue dots also keep the paper threads in place.

Stuff Ups:
1. The faux stitching around the outside. I practised on scrap cardstock first and it looked acceptable but when I started to do it on the card, it all got messed up. The cardstock was too light and my lighting was too bad to see what I was doing properly. I have learnt that it works best on darker cardstock (as it did in my practise session) and with smaller stitches. I need to learn how to 'corner' properly. I need to make the stitches consistently the same size and in a straight line. I feel I almost wrecked the card with the stitching I did at the end.
2. I used a Sahara Sand marker to trace around the sewing machine to cover up some leaked ink from my water colouring, but I wish I had just left it plain.
3. I forgot to position the buttons tag lower (I nearly forgot to use it completely!) which meant the sentiment didn't fit. As a result I had to cut it out from its nice modern label punched tag. I sponged around it and jammed it in the corner. I think it's ok but not what I had planned to do.
4. Maybe placing three buttons under the ribbon as well as on top would better balance out the card? I'm not sure. I don't want the buttons to dominate the whole card.
5. My cutting out could be better. At the very least, I could try a technique that I've seen on YouTube - after cutting out the images, run around the cut edge with the side of a black marker tip so you don't see the white core.
6. I think I can see a dimensional poking out from under a cotton reel.

I know I sound quite critical but I really am pleased with this card, apart from the faux stitching that is.

Father's Day 2 ways: Part 1

Yes, it's been a while! Had a card drought for the last month - no birthdays or anything. I have two for you today - one I made for my Dad and one I made for my father-in-law. I'll start with the one for my Dad.

You can just see a pic of me on the left behind the card - hello me!
I was cruising google images for inspiration and came across a card I adored and have cased it almost entirely I'm sorry to say. It features three Stampin' Up products that I received yesterday (To a Classic stamp set, Newsprint DSP and silver brushed metallic cardstock, oh and the motorcycle stamp that I haven't used yet) so I had to try it. The original card I loved was made by Ros Davidson.

Materials:
Cardstock: Basic Black, Brushed Silver, Very Vanilla, Newsprint DSP.
Ink: Stazon Black, Basic Black.
Stamps: Motorcycle, To a Classic, Teeny Tiny Sentiments.
Other: Sponge, dimensionals, big shot machine.
Non Stampin' Up: Diamond Plate embossing folder by Universal, Black and white checkered Japanese washi tape (inside the card), Stampamajig.

Tips and Tricks:
1. Using the brushed silver cardstock was a lot easier than using a coke can to achieve the metallic effect. Another idea is to wrap a piece of cardstock with tin foil and run that through the big shot machine. The cardstock should give the tin foil the power to hold the embossed image. Haven't tried it myself just yet, only read about it somewhere.
2. I used the stampamajig to stamp the sentiments. I find that the easiest way to stamp with small skinny stamps. I don't bother using the plastic sheet, just that little T-square device. It helps to avoid wobble marks and smudging you make especially if you are prone to it like I am.
3. I sponged around the main image with a watered down Basic Black ink solution. My Basic Black ink spot pad has dried out and I don't have a reinker so I just added a bit of water (and probably wrecked it now) and used that with a sponge.
4. Ways my card differs from the original:

• I am not talented enough to create a masked and stamped image so mine is a single stamped motorbike.
• My proportions and dimensions are different (and probably skewiff).
• I have a sentiment stamped on mine.
• I used a diamond plate embossing folder rather than the square lattice embossing folder.
• So yeah, not a whole heap different...

Stuff Ups: 
1. The Very Vanilla layer - I should have trimmed it down but I was too worried that I'd ruin it so I left it big.
2. Getting that Very Vanilla layer on straight. I must have peeled it off 3 or 4 times. Thank goodness the card didn't bend.
3. Forgot to take a photo of the insert inside. It looks really cool with the black and white checkered washi tape along the bottom - like a checkered flag at the races.

Patchwork Birthday

I've seen this patchwork technique quite a bit on the different blogs that I visit and couldn't resist giving it a try. I learnt a lot for the next time that I attempt it!

This is a similar design to the one in 'Double but Different Part 2'. I made this for another niece's birthday. Normally with my cards I make a single layer insert to write on, particularly if the base cardstock is a dark colour. For this card I made a double layer insert using the same DSP as I have used on the front of the card. Here's a photo:

I'm pleased with the way the insert turned out. It ties it all together nicely.

(This is a very strange coincidence and it's times like these I can't help but know there's got to be a higher power watching over us all - I couldn't remember if the brad I used was called antique or vintage so I went to check in my bag where I keep the brads. I flipped on the light and saw a big spider just about to crawl inside the bag I needed to check. If I had been a moment later I wouldn't have seen the spider - just rustled around in the bag and possibly would have been bitten!! So there you go. Also, old spidey is no longer with us. I made sure of that.)

Materials:
Cardstock: Rich Razzleberry, Very Vanilla (as the base to stick the squares on), Cottage garden DSP (retired I think).
Ink: Old Olive, Rich Razzleberry.
Stamps: Teeny Tiny Sentiments.
Other: Top Note die, Big Shot machine, Vintage Wallpaper embossing folder, Square punch, Chantilly lace, Antique brads, sponge, dimensionals, Modern label punch, paper piercing tool, mat pack, basic pearls.
Non Stampin' Up: Perfect Pearl Mist in Heirloom Gold.

Tips and Tricks:
1. The patchwork -

• I cut a piece of scrap Very Vanilla cardstock the same size as my card. I should have used PLAIN paper!! If you have a go, please try plain paper first.
• I ran my glue tape in close together lines across the scrap of card.
• I used my new square punch to punch out the squares from different sheets of the Cottage Wall DSP and stuck them carefully onto the glue tape.
• When finished I ran it through the big shot using the top note die.
• I ran the patchwork die cut through the big shot again in the Vintage Wallpaper embossing folder.
• I sponged around the outside of the die cut with Old Olive ink. Yeah it's a bit too dark - I got carried away.

2. The base card is sprayed with the Heirloom Gold mist.
3. I cut a strip of DSP and glued it onto the base card to break up the razzleberry.
4. I punched out two modern labels and cut one in half, spaced it out and glued it behind the other to give that extra bit of border. I sponged around it with Old Olive.

5. The lace -

• I cut a piece and glued the ends behind the top note die cut.
• I cut two shorter pieces, twisted them once and thread them underneath the glued on piece.
• Then I stabbed a hole through them and the cardstock with my paper piercing tool.
• The antique brad was pushed through and secured.

6. I added the smallest basic pearls to the modern label punch out to give it a lift. I added them after I took the photo, so sorry you can't see them.

Stuff Ups:
1.  The Very Vanilla cardstock made my patchwork a little bit too thick for the embossing folder so some of the embossed bits split a little. Plain paper would prevent this problem I'm sure.
2. I used too much ink around the top note die cut.
3. Trying to get the brad through all the lace and cardstock was a challenge. It ended up quite bulky so I popped the die cut up on dimensionals to compensate.
4. If I'm being picky, I would only use one type of striped paper and more of it as the two pieces I used don't totally work. At the very least I would try to punch the stripes at the same angle.

A Little Birthday

I don't have much of a call for kids cards as there simply aren't many kids in our family right now - only two. This card I designed for the youngest kid - he has just turned two. I must get some more kid oriented stamps for future years.

This card was inspired by a set of decorative brads I bought featuring cute balloons and birthday cake slices. I didn't end up using any of those on the cover! The blue stars and the big round brads are from that set though.

Materials:
Cardstock: Shimmery White, Gable Green (retired), Real Red, Pacific Point, Whisper White.
Ink: Pacific Point (ink and marker), Pumpkin Pie (marker), Real Red (marker), Daffodil Delight (marker), Chocolate Chip (marker), Versamark, Stazon black.
Stamps: None that are from Stampin' Up.
Other: Pumpkin Pie taffeta ribbon, Lattice embossing folder, big shot machine, Paper piercing tool, mat pack, sponge, dimensionals.
Non Stampin' Up: Fiskars clear stamps - Cookies, Cake & Ice Cream stamp set, Put On Your Party Hat stamp set, Square scallop punch, Doodlebug Designs brads, Fiskars Cupcake border punch.

Tips and Tricks:
1. The scallop squares have Pacific Point ink sponged around the edges to liven them up a little. The squares are also popped up on dimensionals.
2. The stamps on the scallop squares were all stamped in Versamark, then Stazon black, then heat embossed. I find that makes colouring them in easier. The images were all coloured in with markers.
3. Shimmery White is a lot thicker cardstock than Whisper White so I always choose it for a card base.

Stuff Ups:
1. The main reason for the green panel is that the lattice embossing folder doesn't reach to the bottom of the card and I needed a way to hide it.
2. I was going to have more of the green colour in the stamped pictures on the scallop squares but I forgot that I didn't have a marker in that colour. Thankfully there is a little green in those big brads to tie it in better. I also used the green inside the card to make a layer to cover up the back of the brads and that unembossed portion.
3. I kind of wish I used a different colour than green so I could make that cupcake border stand out more. It looks a bit grass and picket fencey to me. Having said that, using blue or red would be too much. Orange would make the ribbon pointless....yellow maybe? Brown?

Double But Different Part 2

So the first twin card is in my previous post. This card I made for Emma. I hope both of them like their cards!

Here's the card recipe (I know I should say procedure but recipe sounds so much cuter):

Materials:
Cardstock: Crumb Cake, Rich Razzleberry, Very Vanilla, Chocolate Chip.
Ink: Rich Razzleberry, Chocolate Chip, Versamark.
Stamps: Bliss, Itty Bitty.
Other: Top note die, big shot machine, Vintage Wallpaper embossing folder, Hemp twine, Itty Bitty buttons, Victoria lace, modern label punch, basic pearls, mini glue dots.
Non Stampin' Up: sentiment stamp from CheeseCake Party by Penny Black, Zing gold glitter embossing powder by American Crafts.

Tips and Tricks:
1. There are small pearls on the vintage wallpaper embossing but the photo doesn't highlight them.
2. The butterflies were stamped by using the 'Rock and roll' technique. I'd recommend that you search youtube for a video demonstrating the technique. I inked up the stamp in Rich Razzleberry then rolled the edges around on a Chocolate Chip ink pad. Voila! Two toned stamping.
3. The Victoria lace is just some scrap ends I had left over that are tucked and glued under the top note die cut with mini glue dots.
4. I used a mini glue dot to anchor the middle itty bitty button to keep them faced up.

Stuff Ups:
1. The clear mount block I used for the 'rock and roll' technique was too big which inhibited my control over the amount of 'roll' I could do. I would use the smallest block I possibly could if I were to do this technique again.
2. I probably should have glued all three itty bitty buttons or none at all because it looks a little lopsided with just one glued.
3. The gold glitter embossing powder - while I like the gold colour it produced, the glitter in the powder caused the end result to be a bit lumpy. I would have liked a smoother end result. Ideally, a gold powder without glitter in it would be a better choice.

A bright birthday

The best thing happened today. I dropped into my favourite stamping store (Stampit in East Vic Park) and they had a sale on Prima and Ki Creations - 50% off it all! I was like a kid in a candy shop and stocked up on all the Prima Flowers and Pebbles that I wanted. You can be sure to see a lot more of those in the future, starting today!

I made a card for my Mum's birthday but I wasn't completely happy with the way it turned out. I had to look to the internet for inspiration as I was suffering from brain burnout. I'll post the card I designed at a later date, but for now here is the card I was inspired to make:

No top note die or modern label punch, aren't you proud of me??
The colours are much bright in real life but that's what bad lighting and bad photography will do.
The card that inspired me to make this is from Ivanka's Card Studio.

Materials:
Cardstock: Basic Black, So Saffron, Melon Mambo, Crumb Cake and Shimmery White.
Ink: Stazon Black.
Stamps: Curly Cute.
Other: Big shot machine, Vintage wallpaper embossing folder, dimensionals, mini glue dots.
Non Stampin' Up: Flowers (Prima Flowers - Raspberry), Blue rhinestones (BoBunny Jewels - Barefoot & Bliss).

Tips and Tricks:
1. This card is pretty straight forward - simple layers and the shimmery white card is dry embossed with the vintage wallpaper embossing folder.
2. The flowers are adhered to the card with mini glue dots.
3. The sentiment is popped up on dimensionals.

Stuff Ups:
1. The sentiment took me ages today because I couldn't stamp it perfectly so I kept redoing it, then I'd get it right but cut it crooked and have to start over. Sooo frustrating!
2. I tried using basic black ink but it kept bleeding through the cardstock. Stazon gives a much crisper result, however, it does stain your stamp.
3. I need to buy new blades for my paper trimmer so the layers are a bit straggly around the edges.

Anya, Flowers and Butterflies

This card was made for my niece and I wanted it to be a little bit girly without being over the top with pink and purple. I turned again to my beloved top note die but changed from my normal landscape style to a portrait style of card. The camera doesn't do justice to the glitter and rhinestones though:

Materials:
Cardstock: Marina Mist, Chocolate Chip, Pink Pirouette, Whisper white (just a little bit), watercolour paper.
Ink: Chocolate Chip, Pink Pirouette, Marina Mist, Versamark, Rose Red, Sahara Sand marker.
Stamps: Curly Cute, Butterfly Prints.
Other: Top Note die, Big Shot machine, Rhinestone accents, Corner punch, dimensionals.
Non Stampin' Up: Fleur Anya stamp, clear embossing powder, black embossing powder, Sizzix Spring Flowers textured impressions embossing folder, silver glitter letter stickers by Papercraft, aquapainter.

Tips and Tricks:
1. The Fleur Anya is stamped on watercolour paper in Versamark and then heat embossed with black embossing powder.
2. Anya is coloured with water and ink using an aquapainter. The colours are added at different intensities to get the shading. Basically her skin is Pink Pirouette ink with a hint of rose red on her cheeks. Anya's dress and flowers are Marina Mist. The flower centres are Rose Red with a rhinestone in the middle of each. Anya's hair is Chocolate Chip ink.
3. It's difficult to see clearly but the Chocolate Chip layer has butterflies stamped on it in Versamark and they have been heat embossed with clear embossing powder.
4. The 'Happy Birthday' sentiment has been stamped in Versamark then Marina Mist ink and finally heat embossed with clear embossing powder.
5. Rhinestones of various sizes are placed on the Happy Birthday sentiment, Anya's flowers and the pink top note die cut.
6. Tiani's name and the flower next to her name are silver glitter stickers which are really sparkly. The camera doesn't show it in this picture, but if you click on the image to make it larger you can see the sparkles!

Stuff Ups:
1. When aquapainting Anya, some of the ink leaked past the black embossed border so I use a Sahara Sand marker to trace around Anya, making the ink less noticeable.

Dad's Birthday

Tomorrow is Dad's birthday, happy birthday Dad! I wanted to make a card about golf since Dad loves golf. While I was looking for inspiration, I found a card design that I loved! It wasn't a golf card but I used what I had to make it kate-ified. The original design is from Create With Christy.

Materials:
Cardstock: Pacific Point, Cherry Cobbler, Chocolate Chip, Very Vanilla.
Stamps: Curly Cute (on the inside as the sentiment).
Inks: Cherry Cobbler classic ink pad.
Other: Big shot machine, Lattice embossing folder, dimensionals, mat pack, paper piercing tool, 2 way glue pen.
Non Stampin' Up: The follow products were bought from Crafty Cards on Garling - golf ball brads (the big, round, white things - the camera doesn't do them justice!), brown grosgrain ribbon, 3D golf stickers by Wishmade. I also used Thickers Fabric chipboard letter stickers in Doll. The bronze brads were from Stampin Stuff. Clear stamps 'Golfer' from http://www.sullivans.net/ though I bought mine from Starfish Lane in Mt Lawley.

Tips and Tricks:
1. On the big tag, I used 2 way glue to adhere the blue cardstock to the red before running it through the big shot machine.
2. The big tag was cut with a paper trimmer. I tried to cut the corners off at right angles to get them even.
3. I used Very Vanilla cardstock to make the white golf balls stand out more. You could substitute that for Whisper White depending on your project.

Stuff Ups:
1. I used the guides that came with the mat pack to align my brads but I still managed to make them look wonky.
2. The tag is too long - if it were shorter, the word 'Dad' would fit better but I made the tag first and forgot to check the height of my letters.

Mother's Day

I simply adore this Mother's Day card, however, I cannot lay claim to the gorgeous design. This design is by the incredibly talented Angie Brown from Stampin' Dreams. I loved it from the second I saw it and knew it would be perfect for my Mum for Mother's Day. It also has a lot of elements to it and not a lot of stamping.

The main differences between my card and Angie's are that I didn't have the same sentiment stamp as Angie so I lowered the placement of the bird and branches, and popped my sentiment up on the modern label punch out (my fave!). Also my white embossing powder was clumpy so I chucked it out (it was useless) and as a result I don't have that pretty detail on the bird's wing. I used plain old Versamark instead.

Here's the procedure:

Materials:
Cardstock: Shimmery White, Bashful Blue, Night of Navy. You could use Whisper White but the Shimmery White is much thicker cardstock and I feel it makes for a sturdier base card.
Inks: Bashful Blue ink spot, Night of Navy ink spot, Versamark.
Stamps: Vintage Vogue, Teeny Tiny Sentiments.
Other: Big shot machine, Top note die, Whisper White satin ribbon, Modern Label Punch, Bird punch, sponge, stick on pearls, retired triple flower punch, dimensionals, 2 way glue pen.
Non Stampin' Up: Polka dots embossing folder by Cuttlebug, black permanent marker.

Tips and tricks:
1. I sponged around the edges of the top note die cut, bird body and modern label punch out piece using Bashful Blue ink.
2. I punched 7 branches out of Night of Navy cardstock using the bird punch. I trimmed them to fit the way I wanted and glued them down with the 2 way glue pen.
3. I coloured a basic pearl with black permanent marker to create the bird's eye.
4. I've mentioned it before, the satin ribbon frays as soon as you look at it so handle it as little as possible.
5. I used Night of Navy ink to stamp the sentiment. I didn't think Bashful Blue was powerful enough.

Stuff Ups:
1. As I said, I was planning to emboss the stamping on the bird's wing in white and then sponge over it with Bashful Blue but my embossing powder was clumpy and no good. It wouldn't stick properly to the Versamark.
2. The Polka dot embossing folder was a little too small for the layer size that I wanted so one end is a little bit sparse with dots.
3. My SNAIL adhesive is really hard to use. It just doesn't want to turn and it is starting to dent my cardstock. It's very disappointing. I also left my back up double sided tape at work so I had to use my precious mini glue dots on the back of the polka dot embossed layer. Using tape rollers can flatten your embossing so it's always best to use peel-the-backing-off it tape (known as Sticky Strip in the Stampin' Up world).
4. My layers are always skewiff, never proportional.

Island Oasis Birthday

I made two of these cards for two friends who's birthdays are in April. Actually they are on the same day! The colour scheme and basic layout of the card was cased from Shaz's Card Table. I added my own style and elements to the card to make it kate-ified.

Below is the insert I will write on then stick into the card. That way if I mess up what I'm writing I haven't ruined the card. It also looks nicer and if your card base is dark, a lighter coloured insert will make reading your written message easier.



I used the flower stamp from the Tropical Party stamp set and added a tiny pearl to the centre of each flower. You could layer the insert on another colour, such as Rose Red, but I want to conserve my cardstock.

Materials:
Cardstock: Tempting Turquoise, So Saffron, Rose Red, Whisper White, Island Oasis DSP.
Inks: Pumpkin Pie ink spot.
Stamps: Tropical Party.
Other: Modern label punch, 6mm Pumpkin Pie Grosgrain ribbon, dimensionals, Lattice embossing folder, big shot machine.
Non Stampin Up!: White stick on pearls from Kaiser, Versamark Dazzle - Frost, 'happy birthday' sentiment from Penny Black's Critter Party stamp set, Prima Flowers High Gloss Pebbles - Birds and Butterflies.

Tips and Tricks
1. The lattice embossing folder doesn't fully fit the length of card required for this project. I managed to press the card once, then align the impressions at the end of the card with the unpressed card inside the folder. Then I put it a little way into the big shot machine. That way it doesn't flatten the already embossed card. That all sounds wordy but I don't know how else to explain it.
2. Never press hard when cutting an embossed piece of card in a paper trimmer. You can crush and damage the embossing. Just use very gentle pressure, enough to stop it slipping.

Stuff Ups:
1. I forgot to allow extra card (only a few millimetres) for the embossing to 'shrink'. I had to trim down my base card to make it all the same length.

2. I wasn't too careful when peeling the pebbles of the backing sheet and the image ripped away from one of the pebbles. Always be gentle! They are a bit pricey for what they are so you don't want to waste them.
3. I would have heat embossed the palm fronds on the background if I hadn't lost my clear embossing powder. So frustrating!!

Our Anniversary

This is hot off the press! It's the anniversary card I have made for my husband. Tomorrow is our second anniversary! Yay us! I'm super proud of this card. No casing, an all Kate design! I used a lot of different stamp sets too.

As usual, the photo doesn't do justice to the card. I used the Colour Coach to get my colour selection - Pear Pizazz, Cajun Craze and More Mustard. I added Very Vanilla because it needed something else.

My gorgeous husband loved the card. The first thing he said was, "Ooh, I like the colours!" Well done Colour Coach! Jason gave me a stunning jewellery box for our anniversary! I have been wanting one for so long, it's just perfect!

Materials:
Cardstock: Pear Pizazz (in colour), Cajun Craze, More Mustard, Very Vanilla.
Inks: Pear Pizazz, Cajun Craze, More Mustard, Versamark.
Stamps: Itty Bitty Bits (hearts on the tags), So Happy For You (background heart on pear pizazz), Teeny Tiny Sentiments, A Happy Heart (retired - big hearts).
Other: Big shot machine, Top Note die, Lattice embossing folder, Hemp twine, Itty Bitty buttons, mini glue dots, stick on pearls, modern label punch, dimensionals, paper piercing tool and mat pack, sponge.
Non Stampin Up!: Fiskars tag punch.

Tips and Tricks:
1. As in my last card post, I ran the Cajun Craze and More Mustard cardstock through the big shot machine together with the top note die. I trimmed the more mustard along the perforation to get that nice border of Cajun Craze. Next I used snail adhesive to stick them together before putting it through the big shot again in the lattice embossing folder.
2. You can't really tell but I put a round Itty Bitty button on each Cajun Craze heart on the tags and a tiny pearl in the centre of each More Mustard heart on the tags to tie in with the pearls on the sentiment. I want to buy the tiny tag punch from Stampin Up! because I find this Fiskars tag punch to be too big. Also the tiny tag punch punches a hole in the top of the tag and the Fiskars doesn't. I had to use my paper piercer which looked messy. I should have used my eyelet tools but forgot I had them till after I finished.
3. The 'Happy Anniversary' sentiment is stamped in Pear Pizazz ink but you can't tell in the photo. I also sponged around the label in Pear Pizazz ink.
4. The Top note die cut is popped up on dimensionals to compensate for the bulkiness of the twine. The sentiment is also on dimensionals.

Stuff Ups:
1. I pulled the twine too tightly when tying it and it cut into the cardstock a little.
2. On the insert that I wrote on inside the card, I accidentally wrote on it portrait-ways (standing vertically) when the card is made in landscape (stands horizontally). I hope I explained that correctly! I didn't want to rewrite it because it came from the heart and I didn't think hubby would care much less notice!
3. Overall the tags are very clumsy. I also forgot to sponge around them with pear Pizazz ink. I would have liked the tags smaller and more precise in their creation but you gotta work with what you've got.

A new colour scheme

I've made two similar cards this week using a colour scheme I would not normally choose. I had some gorgeous Sunny Garden DSP that was screaming to be used. Also my Stampin' Up order came in so I had new toys to play with. These cards, while probably similar to other cards out there, were again from my own mind. I'm glad these worked out because one I attempted earlier in the week just doesn't do it for me.

The 'Thank You' card I made for my Mum and Dad. The 'Congratulations' card I made for my nephew's housewarming.

Materials:
Cardstock: Daffodil Delight, Poppy Parade, Peach Parfait, Pear Pizzazz, Sunny Garden DSP.
Inks: Poppy Parade inkpad.
Stamps: Curly Cute, Punch Potpourri.
Other: Bird punch, Top Note die, Big Shot machine, Daffodil Delight grosgrain ribbon, Modern word label punch, stick on pearls, 2 way glue pen, mini glue dots.
Non Stampin' Up: Polka dot embossing folder by Cuttlebug, Prima Flowers.

Tips and Tricks:
1. I cut out the Poppy Parade and Peach Parfait top notes at the same time, then trimmed the Peach one along the perforation line. I glued them together with SNAIL (glue tape) and then put it in the polka dot embossing folder and ran it through the big shot.
2. I used a 2 way glue pen to glue the leafy branch to the card.
3. On the 'congratulations' card, I cut an extra piece of ribbon and threaded it around the base ribbon. I find that easier than trying to tie it all at once.

Stuff Ups:
The only one (omg, only one!) is that the 'congratulations' sentiment is glued on crooked. I was so annoyed that I didn't spot it until after the glue had set.