New Stampin' Up colours

When I saw this card design I loved it for two reasons - 1. The colours it uses are the new In Colors for Stampin' Up, some of which I haven't used yet. 2. It features a stamp set that I have and hadn't used yet either.

So this card design is not mine, I found it while searching for some inspiration. It's made by Nancy Riley, click on her name to check out the card that she made. Here's my version of her card:

This is for my sister-in-law.

Materials:
Cardstock: Wisteria Wonder, Pool Party, Lucky Limeade, Whisper White.
Ink: Wisteria Wonder, Calypso Coral.
Stamps: Array of Sunshine (Stampin' Up) and Sophie's Sentiments (Lawn Fawn).
Accessories: (This used to be called 'other')  Basic pearls, ribbon (American Craft),
Tools: (This is a new section) Beautiful Wings embosslits, Circle punch, bird punch, scallop edge punch (Fiskars), Lattice embossing folder, 2 way glue pen, dimensionals, mini glue dots, scissors, double sided tape, big shot machine, Scoring board (Martha Stewart).

Tips and Tricks:
1. The branches and leaves were punched with the bird punch. I ran them through the big shot machine in the lattice embossing folder. I used a 2 way glue pen to adhere them to the card.
2. The coral flower was stamped 3 times and cut out. On two of the flowers, I've just cut out the inner sections and layered them with dimensionals.
3. The circles are glued on with a 2 way glue pen as I don't want the edges to lift up. A tape runner wouldn't get close enough the the circle's edge.
4. The butterflies are stuck on with mini glue dots.

Stuff Ups:
1. Originally I used a Vintage Wallpaper embossed piece of Wisteria Wonder instead of the circles but it was too busy for the look that I wanted.
2. When I finished the card, I had a sip from my can of Coke Zero and a drop of condensation landed on my card - oh no!! I got out my heat tool to dry it and it only let the faintest of watermarks. Silly me.
3. Looking at the card now, maybe I should have stuck the lowest branch over the ribbon instead of under it?

Pleasant Surprises:
1. I'm pleased with the overall look of the circles. I like that textured effect.
2. The ribbon matches the Pool Party butterflies nicely.
3. For once my cutting out was not too shabby!

Mother's Day

I simply adore this Mother's Day card, however, I cannot lay claim to the gorgeous design. This design is by the incredibly talented Angie Brown from Stampin' Dreams. I loved it from the second I saw it and knew it would be perfect for my Mum for Mother's Day. It also has a lot of elements to it and not a lot of stamping.

The main differences between my card and Angie's are that I didn't have the same sentiment stamp as Angie so I lowered the placement of the bird and branches, and popped my sentiment up on the modern label punch out (my fave!). Also my white embossing powder was clumpy so I chucked it out (it was useless) and as a result I don't have that pretty detail on the bird's wing. I used plain old Versamark instead.

Here's the procedure:

Materials:
Cardstock: Shimmery White, Bashful Blue, Night of Navy. You could use Whisper White but the Shimmery White is much thicker cardstock and I feel it makes for a sturdier base card.
Inks: Bashful Blue ink spot, Night of Navy ink spot, Versamark.
Stamps: Vintage Vogue, Teeny Tiny Sentiments.
Other: Big shot machine, Top note die, Whisper White satin ribbon, Modern Label Punch, Bird punch, sponge, stick on pearls, retired triple flower punch, dimensionals, 2 way glue pen.
Non Stampin' Up: Polka dots embossing folder by Cuttlebug, black permanent marker.

Tips and tricks:
1. I sponged around the edges of the top note die cut, bird body and modern label punch out piece using Bashful Blue ink.
2. I punched 7 branches out of Night of Navy cardstock using the bird punch. I trimmed them to fit the way I wanted and glued them down with the 2 way glue pen.
3. I coloured a basic pearl with black permanent marker to create the bird's eye.
4. I've mentioned it before, the satin ribbon frays as soon as you look at it so handle it as little as possible.
5. I used Night of Navy ink to stamp the sentiment. I didn't think Bashful Blue was powerful enough.

Stuff Ups:
1. As I said, I was planning to emboss the stamping on the bird's wing in white and then sponge over it with Bashful Blue but my embossing powder was clumpy and no good. It wouldn't stick properly to the Versamark.
2. The Polka dot embossing folder was a little too small for the layer size that I wanted so one end is a little bit sparse with dots.
3. My SNAIL adhesive is really hard to use. It just doesn't want to turn and it is starting to dent my cardstock. It's very disappointing. I also left my back up double sided tape at work so I had to use my precious mini glue dots on the back of the polka dot embossed layer. Using tape rollers can flatten your embossing so it's always best to use peel-the-backing-off it tape (known as Sticky Strip in the Stampin' Up world).
4. My layers are always skewiff, never proportional.

A new colour scheme

I've made two similar cards this week using a colour scheme I would not normally choose. I had some gorgeous Sunny Garden DSP that was screaming to be used. Also my Stampin' Up order came in so I had new toys to play with. These cards, while probably similar to other cards out there, were again from my own mind. I'm glad these worked out because one I attempted earlier in the week just doesn't do it for me.

The 'Thank You' card I made for my Mum and Dad. The 'Congratulations' card I made for my nephew's housewarming.

Materials:
Cardstock: Daffodil Delight, Poppy Parade, Peach Parfait, Pear Pizzazz, Sunny Garden DSP.
Inks: Poppy Parade inkpad.
Stamps: Curly Cute, Punch Potpourri.
Other: Bird punch, Top Note die, Big Shot machine, Daffodil Delight grosgrain ribbon, Modern word label punch, stick on pearls, 2 way glue pen, mini glue dots.
Non Stampin' Up: Polka dot embossing folder by Cuttlebug, Prima Flowers.

Tips and Tricks:
1. I cut out the Poppy Parade and Peach Parfait top notes at the same time, then trimmed the Peach one along the perforation line. I glued them together with SNAIL (glue tape) and then put it in the polka dot embossing folder and ran it through the big shot.
2. I used a 2 way glue pen to glue the leafy branch to the card.
3. On the 'congratulations' card, I cut an extra piece of ribbon and threaded it around the base ribbon. I find that easier than trying to tie it all at once.

Stuff Ups:
The only one (omg, only one!) is that the 'congratulations' sentiment is glued on crooked. I was so annoyed that I didn't spot it until after the glue had set.

Wedded Bliss

Let's start with my favourite card. I made this last week for my good friend's Catherine and Anthony, to celebrate their wedding. I matched the colours to the colours Catherine had chosen for the wedding - the pink for the bridesmaids' dresses, grey for the groomsmens' suits and white for Catherine's dress. As luck would have it, she also had pearls on her dress, veil and accessories. Truthfully, I didn't think my skills were up to the task of making a wedding card. I am surprised and pleased with the results. I wouldn't have given them the card if I felt it was dodgy. This card makes it to the decent end of the scale.

Ooh, a scale! I should rate my own cards! Ok then, here's the scale: Disastrous, Dodgy, Decent, Delightful.

So if that's the scale, I'm gonna bump this card up to delightful. I don't think I'll create much better than this.

All photography featured in this blog is done by me and has a firm 'dodgy' rating.

Rating: Delightful.

To create this card I used products from Stampin' Up. I don't sell Stampin' Up but the colour coordination is something that can't be beat.

Materials:

Card stock: Shimmery White, Blushing Bride, Basic Gray.
Inks: Blushing Bride, Versamark, Versamark Silver Frost (I'll need to confirm that name).
Stamps: Punch Potpourri (hostess level 1) for the heart and Curly Cute for the word 'congratulations'.
Other: Vintage Wallpaper embossing folder, big shot machine, silver embossing powder, Pearl accents, 2 step Bird punch, Whisper White satin ribbon, corner punch, dimensionals (foam adhesives).
The mini easel is from Jacksons Art Supplies.

Tips and Hints:

1. Stamp Basic Gray and Blushing bride card stock with the Versamark silver frost stamp pad. Cover enough to punch out a bird and a wing using the 2 step bird punch. The versamark gives a nice shimmer to the card stock. This will need a while to dry or the wing won't adhere to the bird.
2. Wrap a piece of satin ribbon around the 2 layers of card, just enough to reach around the back and stick it down on the back. Cut a smaller piece to tie on the front. Touch the ribbon as little as possible because it frays as soon as you look at it.
3. You might not see them but I used the smallest stick on pearls on the vintage wallpaper background to give the card a lift.

Stuff Ups:
Corner punch - sometimes it nips in too deep so you get a jaggedy bit on either side of the punch instead of a smooth rounded corner. I tried to round it off with scissors which worked this time but not always.
Versamark silver frost - I didn't wait long enough for it to dry so some sparkle came off of the wings.
Pearl placement - I put on too many and taking some off was difficult. They stick down too well!